442956
15
Zoom out
Zoom in
Previous page
1/36
Next page
wwwwww
..
ffeennddeerr..ccoomm
wwwwww
..mmrrggeeaarrhheeaadd..nneett
15
Adjusts the Reverb highfrequency tone. Or, if Gated Reverb is active, this parameter
adjusts Reverb Shape with which radical decay characteristics can be achieved such as
rectangular, linear and reverse tails.
REVERB TONE / SHAPE Values: 1.0 (minimum) 10.0 (maximum)
Adjusts the Reverb sustain time.
REVERB TIME Values: 1.0 (shortest) 10.0 (longest)
Adjusts the Reverb decay from a sparse/irregular sound to a dense/smooth sound.
REVERB DIFFUSION Values: 1.0 (sparse) 10.0 (dense)
Shifts the equalization of the amplifier providing instant tone shaping to accommodate
playing styles or to compensate for different room acoustics.
TIMBRE Values: None Full Body Razor Edge Bright & Light Bass Booster Drop
Scoop Super Bright Squawk Acoustic Scoop
Selects the phase polarity (push/pull or pull/push) for each speaker. Fender amps with
Reverb have traditionally had speakers operating in reverse polarity due to the extra tube
gain stage necessary for Reverb. Useful when experimenting with stereo mike
placement in the studio.
SPEAKER PHASE Values: Both Standard Both Reverse Left Reverse Right Reverse
Use to compress (moderate) the range of volume output due to extremes between soft
and loud guitar playing intensities. Compression also provides sustain and is a
fundamental component of many amplifiers.
COMPRESSION Values: Off Low Medium High Even Higher 
Use to set the frequency cutoff boundary for the noisegate when it is activated.
NOISEGATE DEPTH Values: 1.0 10.0
Use to set the signal level sensitivity for activating the noisegate. Affected by TRIM
setting.
NOISEGATE THRESHOLD Values: Low Medium High
Assigns a parameter to be controlled by an expression pedal (optional). Parameters in
[brackets] appear only when a particular effect or Reverb is active. For a list of effects
parameters, see page 16, for Reverb parameters, see above.
EXPRESSION PEDAL ASSIGNMENT
Values: Volume Gain Treble Middle Bass Presence Reverb [FX Level]
[FX Val 1] [FX Val 2] [FX Val 3] [FX Val 4] Master Volume Reverb In Level
[Dwell] Reverb Tone [Shape] Reverb Time Reverb Diffusion
Assigns a parameter to be controlled by a MIDI continuous controller pedal (optional).
Parameters in [brackets] appear only when a particular effect or Reverb is active. For
effects types/parameters, see page16, for Reverb types/parameters, see above.
CONT. CONTROLLER ASSIGNMENT
Values: Volume Gain Treble Middle Bass Presence Reverb [FX Level]
[FX Val 1] [FX Val 2] [FX Val 3] [FX Val 4] Master Volume Reverb In Level
[Dwell] Reverb Tone [Shape] Reverb Time Reverb Diffusion
Use to bypass the in or out signals for Reverb tail and/or effects. Or, when Vibratone
is the active effect, the Rotor Speed Fast/Slow parameter is available for switching
between two (adjustable) rotor speeds (see Vibratone, page 20).
REVERB / FX BYPASS Values: FX In Reverb In FX Out Reverb Out FX & Reverb In FX In & Reverb
Out FX Out & Reverb In FX & Reverb Out [Rotor Speed Fast/Slow]
Amp Edit Mode
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fender Cyber-Twin SE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fender Cyber-Twin SE in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info