566092
19
Zoom out
Zoom in
Previous page
1/24
Next page
OPERATING
19
GB
Preparing the appliance
for operation and
switching on the
appliance
Take out a sufficient length of the supply cord and the
appropriate accessories from the compartment.
• Place the motor near the socket, on a hard, stable
surface. Do not cover the ventilation openings of the
housing.
• Open the compartment on the back of the housing and
take out an appropriate screen. (Figure 3)
A screen with 4mm openings is installed in the mincer
body as a standard.
• Wash all accessories thoroughly before the initial use.
Assemble the appropriate accessories and install them
on the motor.
• Plug in the appliance.
• Switch on the appliance using the „ I " switch (the
appliance starts to operate after about 2 seconds).
Mincing unit
Fit the following elements in the mincer body (Figure 4):
The scroll with the clutch facing to the inside of the body.
The cutter to the bolt with the blades facing the screen.
The screen so that the protrusion of the body fits the
groove in the circumference of the screen.
• Tightly fit all the elements of the mincer body.
• Place the assembled mincer body on the motor and turn
left until you hear a click. It means that the body has
been properly installed.
• Fit the tray to the mincer body.
Sausage filler nozzle
Place the following elements in the mincer body (Figure 5):
• The scroll with the clutch facing to the inside of the body.
• The base plate to the bolt.
The sausage filler nozzle.
• Tightly fit all the elements with the ring nut.
Soak the casing for about 10 minutes before fitting.
• Fit the wet casing on the sausage filler nozzle.
Make sure the not to block the ventilation openings on the
nozzle.
The meat cannot be „too thin". A large liquid content may
cause its leakage to the inside of the mincer.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fakir MULTI Fun at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fakir MULTI Fun in the language / languages: English, Turkish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info