Manual Fagor CAT 44NG (page 18 of 104) (English, French, Portuguese, Spanish)

485594

Zoom out

Zoom in

1/104

Attention! Impurities from dried milk

residues in the steam nozzle. Take care

not to immerse the steam nozzle in the

milk far enough to cover the air intake

opening at the top of the steam nozzle.

Otherwise milk can be sucked into the

nozzle and cause impurities in the

steam nozzle.

Turn the Selection dial for steam and

hot water (Fig. 1, D) to the position

(Fig. 16). The display shows the

steam process (indication «STEAM»).

The milk is frothed.

Hold the mug steady during the froth-

ing. The nozzle should not be allowed

to touch the bottom of the mug and

cut off the steam supply. Froth the milk

to at least twice its volume.

To end the frothing, turn the Selection

dial for steam and hot water (Fig. 1, D)

to the position and then remove the

vessel (Fig. 16). The display returns to

the steam readiness indication (indica-

tion «STEAM READY – OPEN

STEAM NOZZLE»).

Caution! Danger of scalding from hot

milk spray! Switch the steam off,

before removing the mug with the

frothed milk.

Exit the steam mode by pressing the

„Steam Pre-selector“ key (Fig. 3, a)

or wait ca. 60 sec., for the machine to

automatically return to the coffee

mode; the indication is extinguished.

Now the machine is once again ready

for making coffee; the last selected

coffee setting is shown in the display.

Each time you have frothed milk, let

off some hot water through the nozzle

for a short time by setting the Selec-

tion dial for steam and hot water (Fig.

1, D) to the position. This is nec-

essary to prevent milk residues drying

inside the nozzle, and thereby blocking

it. Use a suitable container to catch the

water. During this process the display

shows «HOTWATER». Then return

the Selector dial to the position ; the

last selected coffee setting is shown in

the display.

Remove the frothing aid after each use

(Fig.17). For this, take hold of the

frothing aid by the black seal and dis-

engage the bayonet connector by

turning it slightly anticlockwise.5LQVH

off the milk residues under running

water. Wipe the steam nozzle with a

damp cloth.

Caution! Danger of burns from the

frothing aid! Hold the frothing aid only

by the black seal.

9 Preparing Hot Water

The hot water can be used to pre-heat

cups and for making hot drinks, e.g. tea

or instant soups.

Caution! Danger of scalding when the

hot water nozzle is activated! Hot

water or steam output can cause

scalding. Activate the hot water nozzle

only when a container is under the hot

water nozzle.

Place a container under the hot water

nozzle. Set the Selection dial for steam

and hot water (Fig. 1, D) to the

position (Fig. 18). Hot water is ready;

the display shows «HOTWATER».

After you have dispensed the hot water

turn the Selection dial for steam and

hot water (Fig. 1, D) back to the

position (Fig. 18) and remove the

container.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor CAT 44NG in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 10,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor CAT 44NG Manual

Product: