485594
17
Zoom out
Zoom in
Previous page
1/104
Next page
7.1 Filling the ground coffee filler
Turn the coffee bean container to the
„Ground Coffee“ position (Fig. 14).
The mechanism sets to the required
function.
When using ready ground coffee, the
„Coffee Quantity“ function is inactive.
So no coffee quantity signal lamps
light.
Open the lid of the ground coffee filler,
and spoon in the 1 measuring spoon
of the fresh ground coffee (Fig. 15).
Do not add coffee during the brewing
process. Only put in ground coffee for
the next cup when the brewing process
has completely finished and the coffee
machine is ready.
Close the lid.
7.2 Selecting cup size
See „Select Cup Size".
8 Frothing Milk
The steam can be used to froth milk
and to heat liquids. Since a higher
temperature is needed to produce
steam than to make coffee, the coffee
machine has an additional steam
mode.
To make a cappuccino, fill a large cup
1/2 to 2/3 full with espresso, and then
add the frothed milk.
Caution! Danger of scalding when the
steam nozzle is activated! Hot water or
steam output can cause scalding. Do
not activate the steam nozzle until it is
immersed in the milk.
To produce steam, press the „Steam
Pre-selector“ key (Fig. 3, a) . The
indicator illuminates; the „Unit heats“
indicator (Fig. 3, i) can also flash and
the display shows «UNIT HEATS».
When the heating process is finished,
the „Unit heats“ indicator (Fig. 3, i)
lights continuously the display shows
«STEAM READY – OPEN STEAM
NOZZLE». The machine is ready for
the milk frothing.
If the steam function is not used for
longer than 1minute, the machine
switches back automatically to the
coffee mode.
Pour low-fat, cold milk into a mug
which must be small enough to fit
under the steam nozzle.
The milk should be cold. You should
also use a cold mug, preferably a stain-
less steel one which should not be
rinsed beforehand in hot water.
Swing out the steam nozzle and hold
the mug under the steam nozzle so
that the nozzle opening is just
immersed in the milk.
GB
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor CAT 44NG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor CAT 44NG in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 10,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info