Manual Fagor CAT 44NG (page 16 of 104) (English, French, Portuguese, Spanish)

485594

Zoom out

Zoom in

1/104

The top line in the display indicates the

cup size. The instructions for selectig a

different cup size are contained in the

previous section.

To save having to select the coffee

quantity every time you switch on the

coffee machine, you can permanently

save the coffee quantity in relation to

the cup size. Instructions are to be

found under „Programming the cup

measure and the coffee quantity".

6.4 Setting the number of cups and

dispensing coffee

Place one or two cups under the coffee

dispenser. The dispenser can be slid up

or down to match the height of your

cup/mug to reduce heat loss and cof-

fee splashes (Fig. 13).

If the height adjuster is stiff, proceed

as described under „Cleaning the

height adjustment“.

Press the key „1 or 2 cups of coffee“

(Fig. 3, b) once or twice in order

to select 1 or 2 cups. The display shows

«1CUP» or «2CUPS». If you have

selected «2CUPS», the key lights up.

Press the „OK“ key (Fig. 3, g).

The coffee is now made.

In the coffee-making process, the

ground coffee is first of all wetted with

a small quantity of water for pre-

brewing. Following a short pause, the

actual brewing process commences.

You can prematurely stop the coffee

being dispensed at any time by briefly

pressing the previously actuated „OK“

key (Fig. 3, g) once again. This is indi-

cated in the display with «BREAK».

If you have not dispensed coffee for a

long period of time with the machine

switched on, you should rinse the sys-

tem before dispensing again. Start the

rinsing with the „Rinse“ key (Fig. 3, e),

the display shows «UNIT RINSES».

With this additional rinsing phase the

brewing unit is brought back to the

initial coffee dispensing temperature.

7 Making Ready-ground

Coffee

This function allows you to brew pre-

ground coffee, e.g. decaffeinated cof-

fee.

Note that you must use only the sup-

plied measuring spoon, and never put

more than 1 level measuring spoon of

ground coffee into the ground coffee

filler.

Note! Make sure that no ground coffee

has remained in the filler, and that no

foreign bodies enter the filler. The

ground coffee filler is not a storage

container. The ground coffee must be

fed directly into the coffee-making

unit.

If the brewing unit is overfilled, the

machine indicates a fault; the display

then shows «CLEAN BREWING

UNIT» and «SWITCHES OFF

UNIT» alternately. For instructions on

cleaning the brewing unit, see „Clean-

ing the Coffee-making Unit“.

Do not put any water-soluble or

freeze-dried instant powders or any

other drink powder into the ground

coffee filler. Coffee powder, which is

too fine, can lead to blockages.

Please note that the appliance brews

in the two cup operation two cups of

coffe one after another.

Remove the cups not till both

brewing processes are complete.

While the 2 CUP procedure is

running, the OK key indicator is

flashing.

New brewing unit allows only to fill in

1 measuring spoon or ground coffee.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fagor CAT 44NG in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 10,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fagor CAT 44NG Manual

Product: