34555

Fagor Brandt CU3 induction 003UK Manual

40
Zoom out
Zoom in
Previous page
1/46
Next page
THE INDUCTION HOB
Technical training
- 40 -
CU3-INDUCTION-003UK-10/05
DIAGNOSTIC
14.2. - The 'error' codes
'Error' codes are a precious aid to diagnostic. Take care to well identify the model to be troubleshooted,
as codes do not always have the same meaning.
IX3 IX3WR, IX4000 and IX6
NTC T°C < 5°C Room too cold Sans objet
Front source: Pb of
shorted NTC (F1) or open
circuit (F2)
Front source: Pb of shorted NTC
(F1) or open circuit (F2)
Rear source: Pb of
shorted NTC (F3) or open
circuit (F4)
Check the assembly,
connection and ohmic value
of the NTC.
Rear source: Pb of shorted NTC
(F3) or open circuit (F4)
Check the assembly,
connection and ohmic
value of the NTC.
Check of transistors: Pb
of shorted NTC (F5) or
open circuit (F6)
Replace the board, as NTC
and transistors are
interdependent
Check of transistors: Pb of
shorted NTC (F5) or open circuit
(F6)
Replace the board, as
NTC and transistors are
interdependent
T°C of transistors > 70°C
and of
electronics > 105°C
Check the installation
Check the ventilation.
T°C of electronics > 70°C. The
message is followed by a crawler
until the problem is solved.
Check the installation
Check the ventilation.
Reversal of front and rear
NTC's
Check the crimping of
NTC's on their comb, and
the right assembly. If they
are correct: Replace the
board.
Reversal of front and rear NTC's
Check the crimping of
NTC's on their comb, and
the right assembly. If they
are correct: Replace the
board.
Not applicable Mains undervoltage Urms < 180V Mains problem
+
BIP
Not applicable
Continuous pressure > 9s, which
results in power cut and hob
shutdown
If the user acts on a non-covered
key, the display is resumed after
1 min with a ‘beep’ every 8s and
then stops.
Overflow problem or
problem with keys
covered by a container or
other implement.
¾ IX3WR crawler = Overheating of transistors and electronics.
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor Brandt CU3 induction 003UK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor Brandt CU3 induction 003UK in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info