34555

Fagor Brandt CU3 induction 003UK Manual

39
Zoom out
Zoom in
Previous page
1/46
Next page
THE INDUCTION HOB
Technical training
- 39 -
CU3-INDUCTION-003UK-10/05
DIAGNOSTIC
14.1.3. - Breakage resulting from a tight assembly
A tight assembly is due to bad flush mounting of the hob in the frame, or
to bad assembly of the frame onto the hob.
This result in only few cracks, often only one, as shown by the two
drawings. Regions of contractions (jamming) can be in a. b. or c. In
some cases, cracks do not break completely the plate.
14.1.4. - Breakages due to the use of a container with a nonflat bottom
Containers with nonflat bottoms may cause a breakage. The container creates a
hot point (The small point in the drawing) which fuses together the glass and
the container itself. When one takes off the container, a piece of glass can
be removed from the top.
The overheating point can be checked on the inducer screen.
Containers with flat bottoms must be used
14.1.5. - Flush-mounted hob subjected to contractions
This type of break due to the fact that the hob is flush mounted too fit in
the kitchen furniture, more often than not when edges of the working
plane are not flat (e.g.: tiled plane).
It is typical in this type of break, that there is only one crack (a or b)
parallel to one of the plate sides and approximately in the centre of this
plate. In certain cases, the crack does not separate completely the hob.
Precautions:
- Check the flatness of the flush-mounting surface.
– Do not tight too forcefully the hob when mounting it flush.
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fagor Brandt CU3 induction 003UK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fagor Brandt CU3 induction 003UK in the language / languages: English as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info