Manual Faber GV36TT (page 24 of 36) (English, German, Dutch, French)

461221

Zoom out

Zoom in

1/36

24 < < < <

3.6 Setting the remote control.

3.6.1 Indication in display (standard °F/12-h):

 Press the AUTO and TIMER buttons simultaneously, the display will be blinking

(fig. 1.4).

 Now press the AUTO button to change the setting from °C/24-h to°F/12-h or vice

versa.

 The remote control will go back to the normal setting in due time, but this can also

be done directly by pressing the TIMER button.

3.6.2 Time setting:

 Press the AUTO and TIMER buttons simultaneously, the display will be blinking

(fig. 1.4).

 Press the

button to set the hours (fig.1.5).

 Press the

button to set the minutes (fig.1.6).

 The remote control will go back to the normal setting in due time, but this can also

be done directly by pressing the TIMER button.

3.7 Basic functions.

3.7.

1 Manuel:

 Hold the

-button pressed to increase the flame height continuously (fig 1.5).

 Hold the

-button pressed to reduce the flame height in stages and / or to switch

back to the pilot flame position (fig. 1.6).

IMPORTANT: By pressing the

- or the -button (fig. 1.5) the man operation is switched

on and the active thermostat and/or timer programmes are switched off.

3.7.2 Auto : Setting temperature

 Press the AU

TO button, the temperature indications in the display are now

blinking.

 Press the

button to increase the temperature setting (fig.1.5).

 Press the

button the decrease the temperature setting (fig.1.6).

 The remote control will go back to the normal setting in due time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faber GV36TT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faber GV36TT Manual

Product: