Manual Faber GV36TT (page 21 of 36) (English, German, Dutch, French)

461221

Zoom out

Zoom in

1/36

21 < < < <

3.2 Safety Instructions for the User

 The appliance has been designed for atmospheric and heating purposes. This means

that all surfaces of the hearth, including the glass, can become very hot (hotter than

100 °C). An exception to this are the bottom of the hearth and the controls.

 If the hearth has been switched off, wait for at least three minutes before re-igniting

it again.

 If the hearth switches off with no known cause, wait for at least 15 minutes before

re-igniting the hearth again. If this happens repeatedly, get in touch with your gas

fitter.

 The hearth should not be used if: The glass is damaged or has been removed.

If the combustion chamber is open.

 Don’t place any inflammable materials in the combustion chamber.

 Never change the position of the wood set and never add more decorative materials or

carrara pebbles than have been supplied with the hearth. If the hearth is switched on,

the pilot light should always be visible!

 Don’t place any curtains, clothes, laundry, furniture or other inflammable materials

in the neighbourhood of the appliance. The minimum safe distance is 100 cm.

 Don’t allow children to use the remote control unit without adult supervision.

 We recommend you always put a fire screen before the hearth if there are children,

old people or persons with limited mobility present in the same room.

3.3 First time the Hearth is Operated

Before igniti

on, remove all stickers, protective wrappings and, if present, rubber

protective padding from the glass.

Make sure the room is properly ventilated the first time the hearth is switched on. Burn

the hearth at the highest position for some hours so that the lacquer coating will have an

opportunity to set and possible vapours released can be safely removed by ventilation.

Keep children and pets outside the room during this process!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Faber GV36TT in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Faber GV36TT Manual

Product: