Manual FAAC 455 (page 21 of 28) (English)

119529

Zoom out

Zoom in

1/28

Page 21

January, 2004

412 Operator And

455 D Control Panel Installation Manual

THE 455 D CONTROL PANEL INSTALLATION INSTRUCTIONS

NDICATOR-LICHT:

If 0 is selected, the output func-

tions as a standard indicator-light

(lit at opening and pause, flashing

at closing, and off when gate

closed). Time can be adjusted

from 0 to 59s in 1s increments,

and from 1.0 to 4.1 min. in 10s

steps.

0 = Standard Indicator-Light

From 1 to 4.1 = Timed Output

LOSING PHOTOCELLS REVERSE AT

RELEASE: Enable this function if

you want the closing photocells to

stop the gate and reverse it after

the beam is cleared. Default setting

is immediate reverse.

Y = Enable

No = Disabled

A.D.M.A.P. F

UNCTION:

If this function is enabled, the

safety devices to comply with

French standard NFP 25/362.

Y = Enable

No = Disabled

SSISTANCE REQUEST (COMBINED

WITH NEXT FUNCTION): If acti-

vated, at the end of countdown

(settable with the next function, i.e.

“Cycle programming”) it effects 8s

of pre-flashing at every Open pulse

(job request). Can be useful for

setting scheduled maintenance

jobs.

Y = Enable

No = Disabled

YCLE PROGRAMMING:

For setting count down of system

operation cycles. Settable (in thou-

sands) from 0 to 99 thousand cy-

cles. The displayed value is up-

dated as cycles proceed. This func-

tion can be used to check use of

the board or to exploit the

“Assistance Request” function

XTRA WORK TIME:

When operating, if reversing occurs,

and if the leaf does not reach its

end contact point, you can activate

this function to increase work time.

Y = ACTIVE

O = DISABLED

XIT PROGRAMMING:

Exit from programming.

AIL SAFE:

If this function is activated,

it enables a function test of

the photocells before any

gate movement.

Y = Enable

No = Disabled

RE FLASHING (5S):

5s before start of move-

ment.

Y = Enable

No = Disabled

LECTRIC LOCK ON LEAF 2:

For using the electric lock on

leaf 2 instead of on leaf 1.

Y = Enable

No = Disabled

ADVANCED PROGRAMMING

Display Function Default

AXIMUM TORQUE AT INI-

TIAL

THRUST: The motors

operate at maximum

torque (ignoring the torque

setting) at start of move-

ment. Useful for heavy

leaves.

Y = Enable

No = Disabled

AST STROKE AT CLOSING:

The motors are activated at

full speed for 1s to facili-

tate locking of the electric

lock.

Y = Enable

No = Disabled

EVERSING STROKE:

Before opening, while the

gate is closed, the motors

thrust to close for 2 s thus

facilitating release of the

electric lock.

Y = Enable

No = Disabled

EAF 2 OPENING DELAY

S):

Enables delayed start of

leaf 2, avoiding interfer-

ence between leaves.

Y = Enable

No = Disabled

Looking for set up program for 455A control board to FAAC 760 dual gate
Submitted on 9-7-2023 at 01:41
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of FAAC 455 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of FAAC 455

FAAC 455 User Manual - Dutch - 12 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

FAAC 455 Manual

Product: