783557
5
Zoom out
Zoom in
Previous page
1/10
Next page
5
semi-automatic button, which means you must manually stop the flow of water by pushing the button a
second time.
MODEL: LEVER: Fill the portafilter with ground coffee and lock it into the group head (FIG 2).
Dispense the coffee by pushing the brew lever (9) up. To stop the flow of coffee and release the pressure
in the brew group, push the lever (9) all the way down.
Note:
It is important to remove the portafilter and knock out the coffee as soon as you are done brewing to keep
the coffee from clogging the shower screen inside of the brew group. You should also turn on the pump
for a couple of seconds when the handle is out of the group to rinse the shower screen. Always put the
portafilter back into the group head to keep it hot for the next shot.
Note:
A commercial style machine may have a small amount of steam that comes through the brew group when
the brew button is pushed. To make sure that this steam does not hit the coffee, run the pump to purge any
steam before you put the handle with coffee into the group.
Fig. 2
CORRECT POSITIONING OF THE PORTAFILTER IN THE GROUP.
4. STEAMING AND FROTHING
Put the steam arm (4s) above the drip pan (5) and open the steam knob (4) so that any build-up of
condensed water is expelled. Close the steam knob. Put the steam arm into the liquid you’d like heated
and open the steam knob.
BEFORE TAKING THE STEAM ARM OUT (4S) OF THE LIQUID MAKE SURE YOU CLOSE THE
STEAM KNOB.
When you finish the process, put the steam arm over the drip pan and open the knob to clean out the
inside of the steam arm. Close the knob and wipe the steam arm with a soft damp cloth.
FROTHING TECHNIQUES
What is frothed milk?
When you froth milk you inject air into it while steaming. The thickness and texture of the froth will vary
with the technique used. Frothing is best done when the milk is at its coldest and by keeping the tip near
THE GROUP GASKET
MAY NEED REPLACING
CORRECT
INCORRECT
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Expobar Office Lever at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Expobar Office Lever in the language / languages: English as an attachment in your email.

The manual is 0.64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info