802150
22
Zoom out
Zoom in
Previous page
1/30
Next page
22
7. Change charging cable
7.4
Take the charging cable out of the box.
Check that the rubber sealing ring on the charging plug is in
place and not twisted. This is to ensure that the proper IP code
(protection class) is met.
Place the charging station on its side and then plug the
charging cable into the station.
7.5
Turn the station around and place the front face of the station
on a soft and stable surface.
Insert the bolt and tighten it rmly with the supplied Torx T30
bit.
7.6
Reconrm that the cable bolt is tightened properly.
Check again that the charging cable is connected rmly to the
station.
Warning: double check that the charging cable plug is properly
secured into the station with the bolt.
7.7
Align the station to the wall dock and the connectors and press until you hear a clicking
sound. Keep a straight line while mounting the station. To ensure that the connection is fully
secured, press rmly on all four corners and check that there is no air gap between the wall
dock and the station.
7.8
When upgrading your charging cable to a version that is suitable for higher power
application, make sure that the applied RCD and MCB in the service panel are in line with
local regulations, and are also adequate for the type of charging cable installed and the
amount of power Elvi can supply (3.7, 7.4, 11 or 22 kW).
Check with your installer whether the selected output power from your Elvi can be supported
by your local electrical installation. The setting of your maximum available amperage in the
mobile app and/or web platform for station management may need to be adjusted to the
new situation.
CLICK
EN
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EVBox Elvi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EVBox Elvi in the language / languages: English as an attachment in your email.

The manual is 1.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of EVBox Elvi

EVBox Elvi User Manual - English, German - 144 pages

EVBox Elvi Installation Guide - Dutch - 30 pages

EVBox Elvi User Manual - Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info