802150
21
Zoom out
Zoom in
Previous page
1/30
Next page
21
7. Change charging cable
Warning: Risk of electric shock.
Before changing the charging cable, make sure that
the power line you’re using is switched off on your
service panel. The LED ring of the charging plug must
be off.
7.1
Take out the keys from the folder in the box.
Insert the keys into the slots in the bottom of the wall
dock. This releases the snap-t connection of the
charging station to the wall dock. Make sure to push
them in until they only stick out approx. 50 mm and
cannot be pushed in any further.
Now you can remove your charging station from the
wall dock. Pull the charging station away from the wall
dock in a straight line.
Important: Do not twist or skew the charging station,
as that might damage the station’s snap ts and/or
connectors. Be aware that the charging station is still
xed on the connector (socket) of the wall dock and it
requires some force to pull it off.
Take out the keys from Elvi wall dock.
7.2
Turn the charging station around and place the front
face of the station on a soft and stable surface.
Untighten the bolt in the back with the supplied Torx
T30 bit and take the bolt out.
7.3
Place the station on its side and unplug the old cable
out of the charging station.
It is best to store the old cable in its original
packaging.
Tools you need to change the cable
Bit T30
EN
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for EVBox Elvi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of EVBox Elvi in the language / languages: English as an attachment in your email.

The manual is 1.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of EVBox Elvi

EVBox Elvi User Manual - English, German - 144 pages

EVBox Elvi Installation Guide - Dutch - 30 pages

EVBox Elvi User Manual - Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info