The emergency console is used when the remote control does not work or in case of loss of the latter.
Button P1 – ON/OF:
Keeping this button pressed, the stove will switch on or off according to the last settings recorded by the remote control.
Button P2 – heat output increase / decrease:
With this button it is possible to select the stove heat output manually.
03.3 REMOTE CONTROL ASSOCIATION
First ignition and association of the radio remote control to the stove: it is necessary to interface the radio remote control to the emergency display. There are 2
possibilities:
1) With the board off, press the two remote control keys (ok+on-off) until the radio id menu appears. At this point press the “-“ key and the word "NEW"
appears. Press the OK” key and select the desired channel number (“+” and “-“ keys). Turn on the board and press the "OK" key on the remote control
to confirm.
2) With the board on, press the two keys of the remote control (ok+on-off) until the radio id menu appears. At this point, press the "-" key and the word
"NEW" appears. Press the OK” key and select the desired channel number (“+” and “-“ keys). Press the two buttons on the emergency console until all
the LEDs flash.
03.4 MENU
Press the P4 button to access the menu.
It includes several items and levels to access settings and control board programming.
The table below briefly describes the menu structure, focusing in particular on the functions available to users.
BLOWER MODE
This menu permits activation or deactivation of room ventilation. It is possible to do this in any power.
CRONO
Sub-menu M3 – 1 – Enable chrono
The menu on the “ENABLE CHRONO” display permits global enabling or disabling of all chronothermostat functions. To enable, press the P1 button. Press
P3 button to confirm.
Sub-menu M3 – 2 – Daily chrono:
Once the “DAILY CHRONO” menu has been selected, daily chrono is enabled using the P1 and P2 buttons. With the P4 button, the possible items can be
scrolled through, including: switch-on time, switch-off time, set stove heat output, room temperature. It is possible to set two operating ranges. The OFF setting
tells the clock to ignore the command. To change use the keys P1 and P2 while to confirm press P3. In each program you will find: Switch-on time, Switch-off
time, Set stove heat output, Room temperature, Days of the week for which the programme is to be active. Monday is 1 and Sunday is 7.
Sub-menu M3 – 3 – Weekly chrono:
The “WEEKLY CHRONO” menu permits enabling/disabling and setting of the weekly chronothermostat functions. The weekly programming function features
4 independent programmes. Moreover, if the time is set to OFF, the time clock ignores the corresponding control. To change use the keys P1 and P2 while to
confirm press P3.
In each program you will find: Switch-on time, Switch-off time, Set stove heat output, Room temperature, Days of the week for which the programme is to be
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Eva Calor TREVISI at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Eva Calor TREVISI in the language / languages: English as an attachment in your email.
The manual is 3.64 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
