591568
13
Zoom out
Zoom in
Previous page
1/28
Next page
13
Failing that, you proceed as follows:
- Unscrew the four screws in the feet of the bottom plate
- Remove the bottom plate
- Clean the blade with clean water (Note: Do not put down the pump on the blade!)
- Attach the base plate with the four screws.
If you cannot do so, take the pump to your supplier or to an accredited professional
to open the device and remove the residue.
If you regularly use the pump at different locations, you must rinse with clean water
(inside and out) after each use.
Keep the base of the well (or the tile on which the pump is positioned) free from mud
and residue.
Ensure that the pump does not freeze. Before winter sets in, run the pump dry and
store it in a frost-free location.
DEFECTS CAUSES SOLUTIONS
Defects
Solutions
Pump does not start
- Check electrical supply
- Place the float in a higher position
Pump runs but does
not pump water
- Clean them
- Straighten the hose or remove the
blockage
- Switch the pump off and move it from
side to side. Wait until the air has
escaped and switch on again
- Try to remove the blockage or ask a
professional to do so
- Submerge the pump in deeper water
Pump does not switch
off
- Give the float more space
Insufficient water
- Clean them
- Clean the pump and replace worn
out parts
Pump does not start or
suddenly switches off
while functioning
- See: overheating safeguard
- Max. water temperature 35°C
- Check fuses and earth leakage
- Remove dirt and stones
Pump suddenly
provides less water
- Clean the openings
- Clean it
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Flow 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Flow 400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info