591568

Eurom Flow 400 Manual

12
Zoom out
Zoom in
Previous page
1/28
Next page
12
Despite the fact that the pump works automatically, regular supervision is required in
order to ascertain that it has not encountered any functional problems and that it has not
been damaged (see also: overheating safeguard).
Manual function
If used manually, your pump will start to work when you insert the plug into the socket
and you ensure that the float switch is set to ‘on’. You do this by holding the float switch
upright (float cable underneath). The pump will continue to work if you hold the float in
this way (or fix it like this). Stop the pump from functioning as soon as liquid is no longer
being pumped; the pumped liquid also cools the motor and without this cooling effect it
may overheat and break down! Always supervise a pump that is working manually;
drying out will lead to increased wear and tear!
If your pump has run dry it will not automatically aerate itself. Switch it off (remove the
plug from the socket) and move the pump from side to side so that air can escape.
Thereafter, you may use the pump as usual. You are advised to use the pump manually
for short periods only. You should keep your eye on the pump at all times during manual
functioning.
During automatic operation, the pump will turn itself off when there is still some water in
your cellar/boat/pond because the automatic float switch needs space in which to switch.
If you wish to pump out the remaining water, we advise you to use the pump manually in
order to do so. Placing the pump at the lowest point (or in a hollow) will allow you to
remove almost all of the remaining water. Make sure it does not dry out!
OVERHEATING SAFEGUARD
Your submersible pump is equipped with an overheating safeguard. This switches the
pump off automatically if the motor gets too hot. Once it has cooled down sufficiently, the
pump will automatically switch on again.
There is always a cause for overheating: the fan may have become jammed, a bearing
may be worn etc. etc. and if the cause is not removed, the device will overheat once
again. If this process is repeated too often it may cause serious damage to your pump.
Try to establish what is wrong and resolve the problem. If the pump needs to be opened
up you must take it to your supplier or an accredited professional.
If there is insufficient supervision of a pump that is functioning automatically, the pump
may break down despite the presence of the overheating safeguard. The user is always
responsible for supervising the device!
MAINTENANCE
Before you carry out checking or cleaning tasks on the pump you must switch it
off and remove the plug from the socket.
Your submersible pump is more or less maintenance-free. The only tasks you must
carry out are as follows:
Carry out a regular visual inspection. Make sure the pump is not damaged. Check
the electrical cable, the plug, the float switch and the float cable for damage too. If
you discover damage, you must take the device to your supplier or an accredited
professional. Never attempt to carry out repairs yourself and never open the pump!
Regularly check that the float switch is working effectively, particularly if you have set
the pump to work automatically (every 3 months).
Regularly remove residues from the float with clean water.
Regularly check (by putting your fingers into the suction openings or, after the
removal of the curved fitting, in the outlet opening) whether any dirt (fibres, residues)
has accumulated around the blade. Remove it if this is the case.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eurom Flow 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eurom Flow 400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info