796805
9
Zoom out
Zoom in
Previous page
1/37
Next page
14 EN EN 15
Use RoboVac with Amazon Alexa / The
Google Assistant
Amazon Alexa or the Google Assistant is a smart voice control device that
enables you to control RoboVac with your voice.
Before you start, make sure that:
RoboVac is attached to the Charging Base to ensure there is enough power.
RoboVac is connected with the eufy Clean app.
You have an Amazon Alexa-enabled device (i.e. Amazon Echo, Echo Dot,
Amazon Tap, Echo Show, or Echo Spot) or a device enabled with the Google
Assistant (i.e. Google Home, Google Home Mini). These devices are sold
separately.
The Amazon Alexa app or Google Home app is already installed on your
smart device, and you have created an account.
To control RoboVac with Amazon Alexa or the Google
Assistant:
1
Open the eufy Clean app and find “Smart Integrations” in the top left.
2
Follow the on-screen instructions to complete the setup.
Currently, this feature only supports a few languages
including English, German, French, Portuguese, and Spanish.
For more supported languages, check
https://www.eufylife.com/support/.
Cleaning and Maintenance
Prior to cleaning and maintaining, turn o the device and unplug the power
cord.
For optimal performance, follow the instructions below to clean and maintain
RoboVac regularly. The cleaning and replacement frequency will depend on
your RoboVac usage habits.
Recommended Cleaning and Replacement Frequency
RoboVac Part Cleaning Frequency Replacement Frequency
Dust Box and
Water Tank
(2-in-1)
Dust Box: Once a week
Water Tank: After each
use
-
Washable
Mopping Cloth After each use -
Filter Once a week
(Twice a week if you
have a pet)
Every 6 months or after
every 50 rounds of
cleaning
Side Brush Once a month Every 3-6 months (or
when visibly worn)
Brush Guard Once a month Every 3-6 months (or
when visibly worn)
Rolling Brush Once a month Every 6-8 months
Sensors Once a month
-
Charging Pins Once a month -
Swivel Wheel Once a month -
2
Remove the mopping module and water tank.
3
Wet the washable mopping cloth or disposable mopping cloth and
wring it until it does not drip, then attach the cloth to the mopping
module.
4
Open the water inlet cover to fill with water, then close the cover.
Only use the cleaning solution designated by eufy,otherwise
it may affect the cleaning effect and damage the device.
5
Install the water tank and the mopping module under RoboVac with
a click.
6
Start cleaning. RoboVac will automatically vacuum and mop. During
mopping, you can choose among three water levels via the eufy
Clean app.
7
When RoboVac finishes cleaning, remove the mopping module, dust
box, and water tank.
8
Clean the dust box and water tank, empty any remaining water, and
clean the mopping cloth to prevent mildew or unpleasant smells. For
how to clean and maintain the components, refer to the “Cleaning
and Maintenance” section in this manual.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufy RoboVac G40 Hybrid at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufy RoboVac G40 Hybrid in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 10.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info