796805

Eufy RoboVac G40 Hybrid Manual

8
Zoom out
Zoom in
Previous page
1/37
Next page
12 EN EN 13
Auto-Cleaning Mode
After startup, RoboVac moves from the Charging Base and automatically
determines its cleaning route, following a Z-shaped cleaning path. When the
cleaning is finished, RoboVac automatically returns to the Charging Base.
Press to start cleaning in Auto-Cleaning mode.
Spot Cleaning Mode
RoboVac intensively cleans a specific area in a spiral pattern, which is useful
if there is a concentrated area of dust or debris. In Spot Cleaning mode,
RoboVac will stop cleaning after 2 minutes.
• Press on RoboVac to start cleaning in Spot Cleaning mode.
Select a Suction Power Level
In the eufy Clean app, select a suction power level according to your
needs: Quiet, Standard (Default), Turbo and Max.
• When RoboVac starts cleaning next time, it will clean according
to the suction power level you previously selected.
Use Mopping System
• The mopping mode is only intended for a clean floor without
stubborn stains. To avoid staining floors, do not use the mopping
function when dust is mixed with liquids such as coffee or ink.
• Mopping system cleans best on smooth hard surfaces and may
not perform so well on uneven tiles, heavily waxed floors or
rough surfaces like slate or brick, which may snag the mopping
module.
• The mopping mode is not recommended for use when no one is
at home.
• Do not use the mopping mode on a carpeted floor. It is
recommended to set a magnetic strip or physical barrier to avoid
cleaning the carpeted area.
1
Before mopping, make sure the waterproof pad has been installed
under the Charging Base.
1
Download the eufy Clean app from the App Store (iOS devices) or
Google Play (Android devices).
2
Open the app and create a user account.
3
Tap the “+” icon to add RoboVac to your eufy Clean account.
4
Follow the instructions in the app to set up the Wi-Fi connection.
After connecting successfully, you can control RoboVac via the app.
With the app, you can select a cleaning mode, set the time, schedule
a cleaning, adjust suction power, view system status, receive
notifications, and access additional features.
Slowly flashing blue Waiting for connection
Rapidly flashing blue
Connecting with your wireless router
Steady blue
Connected with your wireless router
• If RoboVac gets stuck in any space, tap Find My Robot in the
app to find the device.
Restore Factory Settings
Press and hold on RoboVac for 10 seconds to restore factory settings if
necessary.
You will hear a voice prompt when the settings have been reset and the
Wi-Fi status light will slowly flash blue.
Start / Pause Cleaning
• Make sure the main power switch at the side of RoboVac is
turned on before use.
• You can also start or pause cleaning via the eufy Clean app.
1
Press on RoboVac to start cleaning in Auto-Cleaning mode.
2
To pause cleaning, press again.
Select a Cleaning Mode
• You can also select the cleaning mode via the eufy Clean app.
• By default, RoboVac starts in Auto-Cleaning mode when it is
turned on.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufy RoboVac G40 Hybrid at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufy RoboVac G40 Hybrid in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 10.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info