807226
9
Zoom out
Zoom in
Previous page
1/20
Next page
9
Remove both cross-headed screws from the rear cross-bracket of the
bicycle rack.
Insert the screws into the license plate holder and screw  rmly to
be bicycle rack as shown in Figure 5. Ensure that the license plate
is centred and at the same height as the lights for the license plate.
Figure 4: License plate holder
Figure 5: Mounting the license plate holder
5.1.2 MOUNTING THE LICENSE PLATE HOLDER
The mounting clips (5) for securing the license plate are push-out
parts in the holder. Break out two of the clips. Slide the license plate
into the holder, then push the clips into the cut-outs (6) to secure
the license plate.
Figure 6: Mounting the license
plate
In order to unfold the bicycle rack, start by swivelling the rear
lights outwards. The light mounts are clipped onto the rack table.
Pull the light mounts out of the clips. Pull the locking mechanism
back (Position 1 in Figure 12). Hold the locking mechanism in this
position. Swivel the light mount out fully (Position 2 in Figure 12).
Now release the locking mechanism (Position 3 in Figure 12), the
light mount is now secured to prevent it from folding back in.
5.2 DISMANTLING THE BICYCLE RACK
Figure 12: Locking the light mounts
Fold open the bicycle rack as shown in the following Figures.
1. Fold out the right rear light
3. Fold out the right wheel rail
2. Fold out the left rear light
4. Fold out the left wheel rail
1. Fold out the right rear light
2. Fold out the left rear light
3. Fold out the right wheel rail
4. Fold out the left wheel rail
Figure 13: Screw base
Ensure that the trailer tow bar is undamaged, clean and free of
grease. Remove any paint from the coupling ball.
The bicycle rack is placed with the base horizontally on the trailer
tow bar from above. Insert the screw M16 (Position 1 in Figure 13)
into the base (Position 2 in Figure 13). Tighten the M16 screw slight-
ly and align the bicycle rack parallel to the rear of the vehicle. Now
tighten the M16 screw with the installation wrench in such a way
to ensure that the rack is securely attached and can no longer be
rotated.
Regularly check the  rm seating of the rack on the trailer tow bar as
well as the functionality of the lighting systems.
5.3 MOUNTING THE BICYCLE RACK ON THE TRAILER TOW BAR
Slight signs of pressure on the tow bar ball are
normal and do not in uence the functionality.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eufab 11569 - Crow Basic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 11569 - Crow Basic in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info