Manual Eufab 11569 - Crow Basic (page 7 of 20) (English, German, French, Italian)

807226

Zoom out

Zoom in

1/20

CONTENT

This bicycle rack is mounted to the trailer tow bar of a car and is

designed for the transportation of two bicycles.

This device is not designed to be used by children or persons with

limited mental abilities or without experience and/or lack of

required specialist knowledge. Keep children away from the device.

The device is not designated for commercial use.

Use according to the intended purpose also includes the observance

of all information in these operating instructions, particularly the

observance of the safety notes. Any other utilisation is considered

to be contrary to the intended purpose and may lead to material

damage or personal injuries. EAL GmbH assumes no liability for

damage resulting from improper use.

1. PROPER USE OF THE PRODUCT

2. SCOPE OF DELIVERY

• The trailer tow bar must be approved in its construction.

• Ball and ball rod must have been forged in one piece.

• Mount the bicycle rack only on a coupling made of steel St52-3,

grey cast iron GGG52 or better.

• Unsuitable ball rods made of GGG40.

• The D-value of the tow bar ball must be at least 7.6 kN

• Never mount the carrier on a coupling made of aluminium, other

light metals or plastic.

• These are manufactured e.g. by Westfalia for the following vehicles:

3.1 COUPLING REQUIREMENTS

4. SAFETY PRECAUTIONS

• The warning triangle indicates all instructions which

are important for safety. Always follow these other-

wise you could injure yourself or damage the device.

• Children may not play with the device.

• Cleaning and user maintenance may not be carried

out by children without supervision.

• Do not treat packaging material carelessly. This may

become a dangerous plaything for a child!

• Only use this product for its designated purpose!

• Do not manipulate or disassemble the device!

• For your own safety, only use accessories

and spare parts that are stated in these ins-

tructions or that are recommended by the

manufacturer!

WARNING

Please read the operating instructions carefully

prior to use and observe all safety instructions!

Not observing such may lead to personal injury,

damage to the device or to your property!

Store the original packaging, the receipt and

these instructions so that they may be consulted

at a later date! When passing on the product,

please include these operating instructions as

well.

Please check the contents of package for integrity

and completeness prior to use!

1 x Bicycle rack, assembled

1 x U-shaped bracket with

two frame holders

2 x Knob nut M8

2 x Lock screw M8 x 60

2 x Washer M8

1 x License plate holder

1 x Hexagonal screw M16 x 1.5 x 90

6 x Short tensioning straps

1 x Safety strap

1 x Installation wrench

1 x Operating instructions

1 x Installation wrench

Personal injury or property damage due to changed vehicle

driving characteristics.

• Driving with the mounted bicycle rack will a ect the driving

characteristics of your vehicle.

• Adjust your speed to the new driving characteristics.

• Never drive faster than 130 km/h.

• Avoid sudden and jerky steering operations.

• Remember that your vehicle is longer than usual.

Personal injury or property damage due to loss of the bicycle.

• Driving without the safety strap can lead to accidents.

• Before embarking on any journey, check the correct and  rm

seating of the safety strap around the bicycles and U-shaped

bracket of the rack.

• Before embarking on any journey check the correct and  rm

seating of both straps around the front wheel and the strap around

the rear wheel of the bicycles.

• If necessary tighten the straps again.

1. PROPER USE OF THE PRODUCT ________________ 7

2. SCOPE OF DELIVERY ______________________ 7

3. SPECIFICATIONS _________________________ 7

3.1 COUPLING REQUIREMENTS __________________ 7

4. SAFETY PRECAUTIONS _____________________ 7

5. OPERATING INSTRUCTIONS __________________ 8

5.1 COMPLETING THE BICYCLE RACK _______________ 8

5.1.1 MOUNTING THE USHAPED BRACKET ____________ 8

5.1.2 MOUNTING THE LICENSE PLATE HOLDER __________ 9

5.2 DISMANTLING THE BICYCLE RACK ______________ 9

5.3 MOUNTING THE BICYCLE RACK ON THE TRAILER TOW BAR 9

5.4 MOUNTING THE SHORT TENSIONING STRAPS _______ 10

5.5 MOUNTING THE BICYCLES TO THE REAR RACK _______ 10

5.6 OLDING UP THE BICYCLE RACK ________________ 10

6. MAINTENANCE AND CARE ___________________ 10

7. NOTES REGARDING ENVIRONMENTAL PROTECTION ___ 10

8. CONTACT INFORMATION ____________________ 10

Bicycle rack CROW BASIC for trailer tow bar

Observe the speci cations from the tow bar manufacturer on your

type plate. If in doubt, ask the manufacturer of your trailer hitch

directly whether it is suitable.

3. SPECIFICATIONS

Dimensions (L x W x H): 52 x 117 x 67 [cm]

Folded: 69 x 71 x 19 [cm]

Electrical connection: 13-polig

D-value: 7.6 Kn

Weight: 12 kg

Payload: 50 kg

Max. bike weight: 25 kg

Permitted top speed: 130 km/h

Manufacturer Test symbol Suitable for

Westfalia F 4192 Audi A4

F 3830 Audi A6

F 4112 Audi A8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Eufab 11569 - Crow Basic in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 0.8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Eufab 11569 - Crow Basic Manual

Product: