802071
9
Zoom out
Zoom in
Previous page
1/12
Next page
7 | 10
After the removal of doors untighten the screws on the
plate with cable glands and remove the plate.
If using the bigger gland, make sure that the rubber
inside the gland is of correct size. For the cables with
dimensions up to 5x6 mm2 use the tighter rubber seal.
For the cables with dimension of 5x10 mm2 use a looser
rubber seal which should be already inside the gland by
default.
You can change the rubber seal with removal of the
gland plastic top (unscrew it) and by simply pushing the
rubber seal out of the gland. After the new rubber seal is
inserted into the cable gland, screw the plastic gland top
back on.
Wires Preparation
Proceed with preparation of cables. Prepare power
supply cables from which cable jacket needs to be
removed. Around 15 cm should be removed so that the
wires lengths are sufficient to connect them to the
elements inside the charging station.
You can now pull the power supply cable through the
gland. About 15 cm of power supply cable should be
pulled to the other side of the gland. About 2 cm of cable
jackets should be pulled through the cable gland as well.
This will make cable manipulations inside the charging
station easier and it will completely seal the gland. Make
sure that the cable is fastened securely with the gland so
that it cannot be pulled out. You can tighten the gland by
turning the plastic gland top in clockwise direction.
Strip the wires of insulation using special pliers and
attach cable ferrules on the end of the wires, and a cable
ring for grounding wire.
When Ethernet method is used for physical connectivity
for communication purposes, prepare the Ethernet UTP
cable in the same manner. Your first step should be to
remove the gland filler which is part of the UTP gland
rubber. You can simply push the filler out after you
remove the gland cap by unscrewing it in anticlockwise
direction. Insert the rubber back into the gland as it will
likely come out together with the filler.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etrel Inch at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etrel Inch in the language / languages: English as an attachment in your email.

The manual is 0.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Etrel Inch

Etrel Inch Quick start guide - German - 12 pages

Etrel Inch Quick start guide - Dutch - 12 pages

Etrel Inch Quick start guide - French - 12 pages

Etrel Inch Quick start guide - Italian - 12 pages

Etrel Inch Quick start guide - Spanish - 12 pages

Etrel Inch Additional guide - All languages - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info