Manual Etrel Gen 6 (page 25 of 54) (English)

802074

Zoom out

Zoom in

1/54

There are several guidelines that need to be observed when installing safety arches:

1. The safety arches protect the front side of the charging station, therefore the arch must

be aligned with the rear side of the station (underground anchoring structure),

2. The safety arches on the left and right side of the charging station must be placed at a

distance at least 15 cm from the station,

3. The height of the installed arches is 70 cm above the final level of the foundation.

If the charging station is located on the pavement, the two front ends of the safety arches on

one side must be installed at the edge of the roadside kerb and the charging station must be

placed away from the roadside kerb so that its rear end is aligned with the two rear ends of the

safety arches.

The station can be protected by one or two safety arches (see below) that can be placed at

both sides (2 arches) or at the front (1 arch) of the station.

Figure 11: Longitudinal section of the excavation with two safety arches

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Etrel Gen 6 in the language / languages: English as an attachment in your email.

The manual is 1.77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Etrel Gen 6 Manual

Product: