2756
12
Zoom out
Zoom in
Previous page
1/27
Next page
19
Cleaning
Daily
Clean the ceramic hob after use. You can use,
for example, a little washing-up liquid in
water. Switch on the child safety lock before
cleaning the control panel. Never clean the
ceramic hob with an abrasive cleaning
material!
Weekly
Special maintenance products for ceramic
hobs, such as Collo Profi or Cerafix give the
ceramic hob a protective layer. Treat the hob
with these products also when obstinate
stains have been removed.
Stubborn stains
You can remove burnt-on stains, metal and
lime scale stains from the ceramic hob with
such special cleaning materials as Jif, Collo
Luneta or Stahlfix.
Boiled-over food residues
Remove boiled-over food residues with a
glass scraper. Molten plastic and sugar can
also be removed with a glass scraper.
Do not first allow the hob to cool completely.
Special maintenance products for ceramic
hobs (e.g. Collo Luneta) form an antistatic
layer on the hob so that it attracts dust less
readily.
MAINTENANCE
18
FAULTS
Remedy
Put the plug in the socket.
Change the fuse(s).
Remove with a cleaning
material like Stahlfix.
Do not slide pans across the
ceramic hob.
Clean the appliance or have it
repaired. Do not place
objects on the control panel.
Allow the appliance to cool
down until the code
disappears.
Do not operate more than one
button at the same time.
Cause
The plug is not in the socket.
Defective fuse in the fuse-
box.
Incorrect cleaning material
used.
A control is defective, dirty or
has an object lying on it. Each
control has its own number,
from 00 to 11. The number of
the control will appear in the
display.
Transistors overheated. It is
possible that too large a pan
has been placed on the front-
right zone.
Two or more buttons were
operated for a long time.
Problem
Cooking zones do not get hot.
Metal-like marks on the
ceramic hob.
Error codes F00 – F11 in the
display.
Error code F3 in the display.
Error code F99 in the display.
Trouble shooting
If your appliance does not operate as required, check first if you can solve the problem yourself
by using the table below. The cause of the problem is often a simple one.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna KST265 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna KST265 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info