453519
28
Zoom out
Zoom in
Previous page
1/31
Next page
26
Cold water connection
Connect the cold water supply hose to a threaded (
3
Ú4 inch) connector and make sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the water run to make sure that the water is clear
and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.
Hot water connection
The dishwasher is not suitable for hot water connection.
Positioning the appliance
Leveling the appliance
Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the
height of the dishwasher, making it level. In any case ,the appliance should not be inclined
more than 2º.
Drain hose connection
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into the sink, making sure to avoid bending or
crimping it. Use the special plastic support that comes with the appliance. The free end of the hose must be at a height between 40
and 100 cm and must not be immersed in water.
How to empty the drain hose
If the height of the sink is more than 100 cm, the water can not
be drained through the sink. In that case the drain hose must be
placed in a suitable bowl or bin which is lower than the sink.
WARNING!
Close the faucet after use to prevent water staying in the water
inlet (for models without safety hose).
DIMENSIONS (mm)
Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the
adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right
or the left to facilitate proper installation.
min. 400 mm
max. 1000 mm
ø 40 mm
ø 40 mm
1175
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna EVW7961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna EVW7961 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info