453519
30
Zoom out
Zoom in
Previous page
1/31
Next page
28
Before calling for service
Problem
Dishes and flatware are not
clean.
Cloudiness on glasware.
Black or gray marks on
dishes.
Detergent left in dispenser
cups.
Dishes are not dried.
Possible causes
Improper rack loading.
Improper program.
Not enough detergent was
dispensed.
Items are blocking the path
of spray arms.
The filter assembly is not
clean or is not correctly
fitted.
Spray arms not clean.
Combination of soft water
and too much detergent.
Aluminum utensils have
rubbed against dishes.
Dishes block detergent cups.
Improper rack loading.
Not enough rinse aid.
Dishes are removed too
soon.
Wrong program has been
selected.
Dishware not suitable for
dishwasher.
What to do
See “Loading the diswasher racks” on page 22.
Select stronger program, see page 19.
Use more detergent, or try another brand of detergent.
Rearrange the items so that the spray can rotate freely.
Clean de filter assembly and ensure that it is fitted
correctly (see page 24).
Clean the spray arms (see page 24).
Use less detergent if you have soft water and select a
shorter cycle to wash the glassware and to get them
clean.
Use a mild abrasive cleaner to eliminate the marks.
Re-loading the dishes properly so that they do not
block the detergent dispenser.
See “Loading the diswasher racks” on page 22.
Increase the amount of rinse aid (see page 21).
Do not empty your dishwasher immediately after
washing. Open the door slightly so that the steam can
escape. Wait a couple of minutes before unloading the
diswasher. Empty the low basket first. This prevents
water form dropping off dishes in the upper basket.
In the rapid program the washing temperature is
lower. This also lowers cleaning performance. Choose
the normal program.
Some dishware (plastic or with a plastic coating) is
more difficult to dry in a dishwasher.
Code
Rinse program indicator
light flickers fleetly.
Rapid program indicator
light flickers fleetly.
Normal program indicator
light flickers fleetly.
Problem
Longer inlet time.
Longer draining time.
Leakage.
Possible causes
Faucet is not opened, or water intake is restricted, or
water pressureis too low.
The installation position of the drain pipe is too high.
Some part of the dishwasher leaks water.
Contact the Service department.
Error codes
Unsatisfactory
washing results
Unsatisfactory
drying results
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna EVW7961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna EVW7961 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info