453519

Etna EVW7961 Manual

27
Zoom out
Zoom in
Previous page
1/31
Next page
25
Cleaning the door
To clean the edge around the door, you should use only a soft warm, damp rag. To prevent
penetration of water into the door lock and electrical components, do not use a spray cleaner
of any kind. Also, never use abrasive cleaners or scouring pads on the outer surfaces because they
will scratch the finish. Some papers towels can also scratch or leave marks on the surface.
WARNING !
Never use a spray cleaner to clean the door panel for it could damage the door lock and electrical components. It is not allowed to use
the abrasive agent or some paper towel because of the risk of scratching or leaving spots on the stainless steel surface.
How to keep your dishwasher in shape
About the electrical connection
Electrical requirements
This dishwasher is designed for connection to 220-240 V - 50 Hz, with a fuse of 16 Amp.
WARNING!
Make sure the electrical socket is earthed before connecting the appliance.
Electrical connection
After making sure that the voltage and the frequency values for the current in the home correspond to those on the rating plate, insert
the plug into an electrical socket which is earthed properly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug, please consult the manufacturer or its service agent or a similarly qualified person.
■ After every wash
After every wash, turn off the water supply to the
appliance and leave the door slightly ajar so that
moisture and odors are not trapped inside.
■ Remove the plug
Before cleaning or performing maintenance, always
remove the plug from the socket. Do not run risks.
■ No solvents or abrasive cleaning
To clean the exterior and rubber parts of the dishwasher, do
not use solvents or abrasive cleaning products. Rather, use
only a cloth and warm soapy water. To remove spots or stains
from the surface of the interior, use a cloth dampened with
water and a little white vinegar, or a cleaning product made
specifically for dishwashers.
■ When you go on holiday
When you go on holiday, it is recommened that you run a
wash cycle with the dishwasher empty and then remove the
plug from the socket, turn off the water supply and leave the
door of the appliance slightly ajar. This will help the seals last
longer and prevent odors from forming within the appliance.
■ Moving the appliance
If the appliance must be moved, try to keep it in the vertical
position. If absolutely necessary, it can be positioned on its
back.
■ Seals
One of the factors that cause odors to form in the dishwasher
is food that remains trapped in the seals. Periodic cleaning
with a damp sponge will prevent this from occurring.
CAUTION!
for personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS APPLIANCE.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD GROUNDING PRONG FROM THE POWER CORD.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna EVW7961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna EVW7961 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info