453519

Etna EVW7961 Manual

22
Zoom out
Zoom in
Previous page
1/31
Next page
WATER SOFTENER
Loading salt into the softener (The container must always be filled)
1. Remove the lower basket and then unscrew and remove the cap from the container.
2. If you are filling the container for the first time, fill
2
Ú3 of its volume with water.
3. Place the end of the funnel (supplied) into the hole and introduce about 1.2 kg of salt. It is
normal for a small amount of water to come out of the salt container.
ATTENTION: Remove spilt salt and start a washing program immediately to prevent
damage to the bottom of the diswasher.
4. Carefully screw the cap back on.
ATTENTION: The salt container must be refilled when the salt warning light in the control panel comes on. Though the salt
container is filled enough, the indicator light may not black out before the salt is fully dissolved.
Adjusting Salt Consumption
1. Unscrew the cap from the salt container.
2. There is a ring on the container with an arrow on it (see figure to the side), if necessary, rotate
the ring in the anticlockwise direction from the “-”setting toward the “+” sign, based on the
hardness of the water being used. It is recommended that adjustments should be made in
accordance with the following schema:
Contact your local water board for information on the hardness of your water supply.
This appliance is equipped with a water softener.
20
Always use salt intended for use with dishwasher. The salt container is located
beneath the lower rack and should be filled as follows:
You can adjust the amount of salt consumed based on the hardness of the water used.
Proceed as follows:
WATER HARDNESS
ºClarke
0 - 10
10 - 28
28 - 56
>56
ºdH
0 - 8
8 - 22
22 - 45
>45
mmol/l
0 - 1.4
1.4 - 3.9
3.9 - 8
>8
selector position
/
-
Mid
+
salt consumption
(gram/cycle)
0
20
40
60
autonomy
(cycles/2 kg)
/
50
25
16
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Etna EVW7961 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Etna EVW7961 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info