Manual Ergofix 77207-1 (page 25 of 44) (English, German, Dutch, French)

621623

Zoom out

Zoom in

1/44

MOVING THE LOG SPLITTER TO THE WORK SITE

The log splitter is equipped with 2 wheels for minor

transportation. To move the log splitter to the work site:

grip the handle (1) to tilt the log splitter slightly after

making sure the oil tank cover is tightened.

If using a crane, lay hoist sling around the housing. Never

try to lift the log splitter at the handle (1).

5. OPERATION

▪

Plan your work site. Work safely and save effort by

planning your work in advance. Have your logs

positioned where they can be easily reached. Have a

site located to stack the split wood or load it onto a

nearby carrier.

▪

Prepare the logs for splitting. This log splitter

accommodates logs up to 1055 mm in length. When

cutting up limbs and large sections, do not cut sections

any longer than 100 cm. With 3 support table positions

for splitting for 575 mm, 770 mm and 1055 mm in

length. Insert the support table in position nearest the

log length and secure the support table with the locking

hook.

▪

A thin coat of grease to the surfaces of the ram before

operation will lengthen the durability of the ram.

▪ Route the power cord. Route the cord from the power source to the splitter in a

way that safeguards against tripping on the cord or the cord becoming

damaged during the work session. Protect the power cord from impacts, pulling

or corrosive materials.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ergofix 77207-1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ergofix 77207-1 Manual

Product: