520011
44
Zoom out
Zoom in
Previous page
1/88
Next page
Technical and optical modifications as well as misprints reserved - © 2019 by ERGO-FIT GmbH & Co. KG
Operation
How to create a new user profile (A-D) (CYCLE 450/CYLCE 457 MED/MED SPO
2
only)
1. Push the PLUS/MINUS buttons until the programme PROFILES is selected.
Confirm your choice with the START button.
2. Select the Profile Editor using PLUS/MINUS buttons, confirm selection with
START.
3. Push the PLUS and MINUS buttons to choose the type of profile first (load profile,
heart rate, gearshift). Confirm this with START.
4. Now push the PLUS/MINUS buttons until the desired user profile (A-D) is selected.
Push the START button to open the changing level.
5. Press START again to change the profile.
6. On the changing level you can set the strain intensity per strain level. Push the
PLUS and MINUS buttons to set the strain (default: begin profile step 1). Press the
START and STOP buttons for choosing the profile step. Press the STOP button at
profile step 1 or press the START button at profile step 20 to enter the main menu.
Your changes are saved.
7. From the main menu, select the PROFILE program again using the PLUS or MINUS
button, confirm by pressing the START button, then confirm PROFILE SELECTION
with START. Select the desired profile with the PLUS or MINUS button and confirm
by pressing the START button. The four user profiles will appear (except for „Gear-
shift“ profile, see Point 10). Make your selection using the PLUS or MINUS button
and confirm with START. Procedures that follow are described in Points 8-10.
8. If you selected the „Load profiles“ profile type, you can change the start load using
the PLUS/MINUS buttons. Now confirm with the START button and set the
maximum exercise time. By pressing the PLUS or MINUS button, you can select
different exercise times, from 10 to 60 minutes in duration (default time - 20
minutes). Press the START button to confirm. See Point 11.
9. If you selected the „Heart rate“ profile type, you can set the maximum exercise time
here. By pressing the PLUS or MINUS button, you can select different exercise
times, from 10 to 60 minutes in duration (default time - 20 minutes). Press the
START button to confirm. Now the cardio parameters are displayed. You can also
change the start load using the PLUS/MINUS buttons. Press the START button to
confirm. See Point 11.
10. If you selected the „Gear change“ profile type (CYCLE 450 only), you can now enter
your weight using the PLUS/MINUS buttons. After you confirm with the START
button, the four user profiles will appear. Make your selection using the PLUS or
MINUS button and confirm with START. You can now set the maximum exercise
time. By pressing the PLUS or MINUS button, you can select different exercise
times, from 10 to 60 minutes in duration (default time - 20 minutes). Press the
START button to confirm. See Point 11.
11. You are now entering training mode. You can change strain intensity within the limits
of the pre-assigned strain intensity range by pushing the PLUS and MINUS buttons
at any time. The timing will also be displayed in the profile (in italic letters).
38
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ergo-fit Cardioline 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ergo-fit Cardioline 400 in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Ergo-fit Cardioline 400

Ergo-fit Cardioline 400 User Manual - German - 116 pages

Ergo-fit Cardioline 400 User Manual - Dutch - 92 pages

Ergo-fit Cardioline 400 User Manual - French - 94 pages

Ergo-fit Cardioline 400 User Manual - Spanish - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info