Manual Erbauer EMIS216S (page 26 of 37) (English)

779795

Zoom out

Zoom in

1/37

3. Move the operating handle (1) until the bevel angle pointer (10a) aligns with the

desired angle on the bevel scale (10) (Fig. L step 3).

WARNING! Always ensure the saw blade does not interfere with the

fence or any other parts. Remove the fence if necessary.

4. Lock the bevel angle locking lever (Fig. L step 4).

WARNING! Always check the bevel locking handle (22) before working. A

loose bevel locking handle may cause serious injury.

03 Adjusting cutting depth gauge (Fig. M)

Use the depth stop (35a) and adjustment knob (35c) to limit the cutting depth of the

saw blade into the workpiece.

1. Push in the depth stop (35a) to cut the workpiece with the max. cutting depth.

2. Pull out the depth stop (35a) (step 1).

3. Loosen the locking nut (35b) (step 2).

4. Turn the adjustment knob (35c) clockwise to decrease the cutting depth (e. g. for

non-through cutting operations such as grooving / slotting) (step 3).

5. Turn the adjustment knob (35c) anticlockwise to increase the cutting depth.

6. Tighten the locking nut (35b) (step 4).

04 Adjusting slide cutting (Fig. N)

1. Use slide cutting to saw a workpiece that is larger than the maximum cutting length

of the saw blade.

2. Loosen the slide locking knob (8) (step 1) to allow the cutting head to slide freely

(step 2).

05 Adjusting extension supporter (Fig. O)

Use the extension supporter for supporting long workpieces. Use an additional support

for extremely long workpieces if required.

1. Unlock the extension supporter locking lever (15) (step 1).

2. Pull out the extension supporter (14) to desired position (step 2).

3. Pull out the small fence (14a) if necessary (step 3).

4. Lock the extension supporter locking lever (15) (step 4).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Erbauer EMIS216S in the language / languages: English as an attachment in your email.

The manual is 5.45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Erbauer EMIS216S Manual

Product: