779795
28
Zoom out
Zoom in
Previous page
1/37
Next page
28
EN
09 Laser (Fig. R, S)
Use the laser as guide when cutting.
1. Switch the laser (31) on by pressing the “laser” symbol of the laser switch (3).
2. Switch the laser off by pressing the “OFF” of the laser switch.
The laser line should be aligned with the blade cutting path. Readjustment of the laser
shall always be carried out by the manufacturer of the tool or his service organization.
10 Switching on/off (Fig. R)
1. Press either the left safety lock button (29) or the right safety lock button (27) down
to unlock the on/off switch (28) (step 1).
2. Press the on/off switch (28) to switch the product on (step 2).
3. Release the on / off switch (28) to switch the product off.
Operation
WARNING! Check the voltage before plug in. The voltage must comply
with the information on the rating label!
01 Slide cutting
Use slide cutting to saw a workpiece that is larger than the maximum cutting length of
the saw blade. Use slide cutting in mitre, bevel or compound angle adjustment.
1. Set the product at “operation position”.
2. Loosen the slide locking knob (8) to allow the cutting head to slide freely.
3. Adjust the cutting depth gauge (35) to desired cutting depth if required.
4.
Place the convex edge of the workpiece against the fence if it is warped.
The workpiece could break and jam the saw blade if the concave edge is
placed against the fence.
5.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Erbauer EMIS216S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Erbauer EMIS216S in the language / languages: English as an attachment in your email.

The manual is 5.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info