20028
21
Zoom out
Zoom in
Previous page
1/107
Next page
Product Description
UiWtJ
Service
Mhnual
1.4 OPERATING INSTRUCTIONS
.“
“II
This section describes control panel operation
~ctions,
self-test, hexadecimal dump, ~n
~
~
demonstration functions, and printer initialization methods.
1.4.1 Control Panel Operation
The printer control panel contains three non-lock-type push buttons and three LED
indimtors
for
easy operation of the various printer functions.
Buttons
Lights
A
Light
/
/
Roman O O
Font
Saris
SerifO
Draft.
o
Draft Condensed. I
2
I
W
W
Micro Adjust
o
Q
3sec
Paper Feeding
Load:
Load (manual insertion):
Line feed:
Eject cut sheet:
Form feed (continuous):
Paper park (continuous):
Tear-off (continuous):
Character Selection
Font selection:
Pitch selection:
Condensed selection:
Enter
Speaal
Mode
Self-test mode:
Default-setting mode:
Hex dump mode:
Demonstration mode:
Figure 1-8. Panel Apperance
Press the
LF/FF
button.
Press the
LF/FF
button or the printer waits 2 seconds after insertion
of a cut sheet to load paper automatically.
Press the
LF/FF
button once.
Hold down the
LF/FF
button continuously.
Hold down the
LF/FF
button continuously.
Press the FONT and
LF/FF
buttons at the same time.
Only uses auto tear-off function.
Press the FONT button.
Selectable indefault-setting mode: 10
cpi.
or 12
cpi.
Press the FONT button. Only draft condensed is selectable.
Hold down the
LF/FF
button and turn on the printer.
Hold down the FONT button and turn on the printer.
Hold down the
LF/FF
and FONT button and turn on the printer.
Not available.
1.4.2 Self-test Function
This section explain how to run the self-test.
1.
Hold down the
LF/FF
button and turn on the printer to start the self-test.
2. If paper is not loaded, the printer attempts to load it.
3. If the printer
camot
load paper, it indicates this by turning on the PAUSE light. In this case,
insert paper again and press the
LF/FF
button.
4. The printer prints alphanumeric characters continuously.
5. Quit self-test mode printing by pressing the PAUSE button and turning the printer off.
1-14
Rev.
A
,,
.
L
~..,,
.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson LX300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson LX300 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson LX300

Epson LX300 User Manual - English - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info