20028
23
Zoom out
Zoom in
Previous page
1/107
Next page
Product Description
LXiWO
Service Manual
1.4.7 Printer Initialization
There are two types of initialization: hardware initialization and software initialization.
1.4.7.1 Hardware Initialization
Hardware initialization is performed by:
. Turning on the printer.
.
Sendiny@e parallel interface
the~signal.
(If the INIT signal is active when the printer is turned on, hardware initialization is started when
the
~
signal becomes
imctive.)
When hardware initialization is performed:
. The printer mechanism is initialized.
. Print data in the input buffer is cleared.
. Download character definitions are cleared.
. The printer’s settings are returned to the defaults.
. The printer is set to the standby condition, if no fatal error occurs.
. Continuous paper home-seeking is performed.
In continuous paper home-seeking:
. The printer feeds continuous paper to the paper park position.
The printer then loads the paper again.
If ejection to the paper park position cannot be completed within 16 inches, paper is returned to
its previous position.
1.4.7.2 Software Initialization
Software initialization is performed upon receipt of the control code
ESC
C?.
When software
initialization is performed:
. Print characters in the buffer are not cleared.
. The printer setting is changed to the default, but the download character definition is not cleared.
1.4.8 Printer Settings
1.4.8.1 Selectable Printer Settings
The following printer settings can be changed by users in default-setting mode:
Character spacing:
Shape of zero:
1 inch skip-over-perforation:
Auto line feed:
Character table (Standard):
Character table
(NLSP):
Page length:
Auto tear off:
Tractor:
interface:
Bit rate (serial I/F):
Parity bit (serial I/F):
Data length (serial I/F):
ETX/ACK (serial I/F):
.lQc@
/ 12cpi
Slashed / Not slashed
on/Qff
on/Qff
Italic
(JJSA/France/Germany/UK/Denmark l/Sweden/Italy/
Spain
1)/PC437/850/860
/861/863
/865/BRASCII/Abicomp
Italic
&?SA/France/German
k l/Sweden/Italy/y/UK/Denmar
Spain
1)/KG7/~/S2/8S/E5
/857/=/869/07
Greek/ISO
Latin IT /1S0 8859-7/Code MJK/Mazowia/Bulgaria
11/ 12/ 8.5 / 70/6 inches
on/Qff
Single
/ Double
~/ Auto selection (30 sec wait) / Parallel
/ Serial
300 / 600/ 12(MI / 2400 / 4800 /
$?6Ul
/ 19200 bps
Mm/
Odd / Even
Z.Ms
/ 8 bits
~
/ Enabled
Note:
Underlines show factory setting.
...
-
~?
..
.
.
.
.
1-16
Rev.
A
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Epson LX300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Epson LX300 in the language / languages: English as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Epson LX300

Epson LX300 User Manual - English - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info