609401
20
Zoom out
Zoom in
Previous page
1/28
Next page
20
IP1839EN • 2012-07-31
18. ADJUSTMENTS
Description OFF ON
DIP1 Command 1-5 operation.
NOTE: it also sets operating mode of the
plugin cards connected on AUX.
Step-by-step. Opening.
DIP2 Direction selection. Opening towards gearmotor. Closing towards gearmotor.
DIP3 Disengagement on the closing stop
with JR2=ON.
2 mm. 0,5 mm.
NOTE: use of the selection
is recommended to prevent
the sectional door from clo-
sing incompletely.
Disengagement on the closing stop
with JR2=OFF.
5 mm. 5 mm.
DIP4 Automation status at power on.
Indicates how the control panel considers
automation when powered up.
Open. Closed.
NOTE: if the automatic clo-
sing function is not used,
preferably set DIP4=ON.
DIP5 Electric lock release.
Before opening from closed door, a thrust
is included in closing to facilitate electric
lock release.
Disabled. Enabled.
DIP6 3 seconds preashing. Disabled during opening.
Enabled only with automatic
closing with TC>3 s.
Enabled for both opening
and closing.
GLOBE10
Description OFF ON
SO Reversal safety switch function. With the automation blocked,
if the contact 1-8 is open, it
is possible to activate the
opening operation.
With the automation blocked,
if the contact 1-8 is open,
any operation is impossible.
JR2 Automation type selection. Up and over door with
counterweights.
Sectional door or up and
over door with springs.
JR3 Selection of maximum working force
limit.
Normal closing force. Reduced closing force.
JR4 Incorporated radio receiver. Disabled. Enabled.
Trimmer Description
R1
minmax
Force adjustment.
The control panel is equipped with a safety system that stops motion if an obstacle is
encountered during an opening operation and inverts the movement during a closing
operation.
TC
0 s Disabled
120 s
Setting automatic closing time. From 0 to 120 s.
The counter starts when automation is opened and lasts for the entire duration set with
TC trimmer (100%).
Once a safety switch has been activated, the counter starts as soon as the safety
switch is released (for example, after passing through the photocells), and lasts for the
entire time set with TC trimmer (100%).
Note: after the activation of the stop command, once contact 1-9 has closed again,
automatic closing is only enabled after a total, partial or step-by-step opening com-
mand.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrematic Ditec GLOBE IP1839 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec GLOBE IP1839 in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Entrematic Ditec GLOBE IP1839

Entrematic Ditec GLOBE IP1839 User Manual - German - 28 pages

Entrematic Ditec GLOBE IP1839 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info