609401
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
IP1839EN • 2012-07-31
17. OUTPUTS AND ACCESSORIES
Output Value - Accessories Description
4901 23
+
-
24 V= / 0.3 A
Accessories power supply. Power supply output for external ac-
cessories, including automation status lamp.
0
14
LAMPH
24 V= / 25 W
Flashing light. Activated during opening and closing operations.
24 V= / 25 W
Internal courtesy light. A courtesy light that turns on for 180 se-
conds with every opening (total or partial), step-by-step and closing
command can be connected.
1
13
24 V= / 3 W
Automation status lamp (proportional).
The light switches off when the automation is closed; the light
switches on when the automation is open; the light ashes with a
variable frequency while the automation is operating.
0
15 24 V= / 1.2 A max
Electric lock. With DIP5=ON, on with the door closed.
0
15 12 V / 15 W
Electric lock. With a 12V electric lock, connect the supplied 8.2 Ω /
5 W resistance in series.
With DIP5=ON, on with the door closed.
ANT
BIXAL
Connect the supplied antenna wire (173 mm), or alternatively the
BIXAL antenna, using a coaxial cable, type RG58.
AUX
The control panel has one housing for plug-in cards such as a radio
receiver type, magnetic loops, etc.
Plug-in card operating is selected using DIP1.
WARNING: the plug-in cards must be inserted and removed with
the power supply disconnected.
COM
BIXMR2
The BIXMR2 storage module allows remote controls to be stored.
If the control panel is replaced, the BIXMR2 storage module being
used can be inserted in the new control panel.
WARNING: the storage module must be inserted and removed with
the power supply disconnected.
BAT
BATK1
2 x 12 V / 2 Ah
Battery operating. The batteries are kept charged when the power
supply is on. If the power supply is off, the control panel is powered
by the batteries until power is re-established or until the battery
voltage drops below the safety threshold. If this occurs, the control
panel turns off.
WARNING: the batteries must always be connected to the control
panel for charging. Periodically check the efciency of the batteries.
NOTE: the operating temperature of the rechargeable batteries is
approximately +5°C/+40°C.
GLOBE10
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Entrematic Ditec GLOBE IP1839 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Entrematic Ditec GLOBE IP1839 in the language / languages: English as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Entrematic Ditec GLOBE IP1839

Entrematic Ditec GLOBE IP1839 User Manual - German - 28 pages

Entrematic Ditec GLOBE IP1839 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info