722072

Enduro AS101 Manual

40
Zoom out
Zoom in
Previous page
1/48
Next page
ENDURO
®
autoSteady 33
Ref: AS101-UM-TKI-0114-Rev. A
If necessary you also need to connect the ground (-) of the car power source to the minus (marked 12V-) of
the control unit (when the caravan battery is also used for lighting/water pump of the caravan this is not
necessary).
If you need any help finding the constant power source of the car (in your caravan) please contact the
manufacturer or supplier of your caravan for the wiring diagram.
NOTE: This constant e cable power source (+12V) CANNOT be in direct connection with the
caravan battery! Check this very carefully, otherwise the autoSteady system will not work!
You can test this by disconnecting the connector from the car so the constant +12V voltage
drops. By connecting the connector on the car again, the +12V voltage will be restored. If
you have doubts you can drop this option (it is not obliged).
Route the cable for the emergency draw back function (18) from the constant power source (+12V) to control
unit (6).
Again it is recommended to use the supplied trunking (26) to protect the cables against sharp edges. Attach the
cable and trunking with the cable ties (17) or P-Clips (14 & 15) and mounting screws for P-Clip (13).
Cut the cables to the correct length. Remove approx 5mm of the insulation from the end. Fix the spade
connectors (23) by using crimping pliers. A secure and good quality connection on each cable is essential.
Connect the cable for emergency draw back function (18) to the control unit (6).
Installation of the autoSteady system is now complete.
OPERATION - SAFETY GUIDELINES
Practice operating the autoSteady system before using for the first time. This is to fully familiarise yourself with
the remote control and the autoSteady system operation.
Before use, always check the autoSteady system for any damage.
Always ensure that children and pets are kept well out of the way during operation.
When operating the system, ensure that no hairs, fingers or other body parts, clothing or any other
objects carried on the body can become trapped by moving or rotating parts.
Do not use the autoSteady system to jack up your caravan. Just as the standard corner steady of your
caravan can only be used for stabilising, also the autoSteady system cannot be used for jacking up
your caravan.
Before using the autoSteady system always make sure that your caravan is levelled out in all
directions.
In the event of malfunctions, turn off the main isolation power switch immediately.
To maintain signal strength, always make sure that, during action, the distance between the remote
control and the caravan does not exceed 5 metres.
Due to the nature of a radio signals, external terrain or objects can interfere and reduce the
effectiveness. So there may be small areas around the caravan where the quality of reception reduces,
hence the autoSteady system may stop momentarily.
Always be aware that the autoSteady system increases the weight of your caravan. So this reduces
the payload of the caravan.
Always make sure that all the corner steady are fully drawn back before towing/moving the caravan.
This can damage the corner steady, caravan or the towing vehicle.
Always make sure that after you have finished using the autoSteady system, the battery power
isolation switch (24) is switched off and the key is removed and stored in a safe place (out of reach of
children or other unauthorised people). If you don’t switch off, the battery will be discharged by the
small ”standby” current.
Always apply the handbrake during action.
Always make sure that the remote control is stored in a safe place (out of reach of children or other
unauthorized people). If you don’t switch off, the battery will be discharged by the small ”standby”
current.
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Enduro AS101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Enduro AS101 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info