807574

Enduro 16609 Manual

9
Zoom out
Zoom in
Previous page
1/26
Next page
9
6. MANUAL
6.2 USING THE CHARGER ADAPTER
6.3.2 CONNECTING A MOBILE HOME/CAMPER COMFORT BATTERY WITH THE EYELET ADAPTER
6.3.1 CONNECTING A VEHICLE STARTER BATTERY WITH THE POLE CLAMP ADAPTER
6.3 CONNECTING THE CHARGER
Preparation
Only for open batteries
6.1 OVERVIEW
The pole clamp adapter (Position 10 in the overview) when connecting the charger in the classic way to the poles of the battery. The eyelet
adapter (Position 9 in the overview) is designed to remain rmly attached to a battery which is dicult to access. The charger can be conveniently
connected using the adapter.
Clean the battery terminals to remove dust and corrosion residue.
Remove the plugs of the battery cells. Check the liquid level in the cells, consult the operating instructions of your battery for more information.
Replenish only sucient distilled water to ensure that the minimum lling level is achieved. The liquid will expand during the charging process
and the battery may overow. Leave the cells of the battery open until the end of the charging process.
In case of closed and maintenance-free batteries, please follow the instructions of the battery manufacturer to the letter.
Always rst connect the red plus cable (+) to the positive pole of the battery. Then connect the black minus cable (-) to the minus pole of the
battery. If you charge the battery in situ, connect the black negative cable (-) to the car body (exposed part), far away from the battery, the
carburettor and fuel lines. Always maintain this sequence.
Attach the eye of the red plus cable to the plus connection cable of your vehicle battery, e.g. the screws of the pole terminal. Attach the eye of the
black minus cable to the earth connection cable (minus cable) of your battery. Lay the cable so that it is free from bends and tensions. It may not
be attached in the vicinity of hot or rotating parts of the motor. The connection plug may not get wet.
1. Operating control light
2. Warning light for reverse polarity
3. Charge status display 25 %
4. Charge status display 50 %
5. Charge status display 75 %
6. Charge status display „full“ %
7. Charging cable
8. Mains connection cable
9. Eyelet adapter
10. Pole clamp adapter 78
9
10
1
2 3 4 5 6
Figure 1: Overview
Make sure that the charger is not connected to the power socket and that the pole clamp adapter (Position 10 in the
overview) is not connected to the battery charger.
Make sure that the charger is not connected to the mains power socket and that the eyelet adapter (Position 9 in the
overview) is not connected to the battery charger.
CAUTION
CAUTION
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Enduro 16609 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Enduro 16609 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4.3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info