Manual Emtec H510 (page 12 of 74) (English, German, Dutch, French, Italian)

473755

Zoom out

Zoom in

1/74

2322

Learning, cont.

You can learn commands from an existing remote and store them under

the “Main” keys on the H510 remote, or learn commands from an

existing remote and store them under any of the 10 Side Keys.

At the Home screen press the Side Key next to Setup and then on the

side key next to Learn.

At this screen you press any of the 5 Side Keys K1-K5 on the left to

learn commands under a Side Key, or press any of the top 4 Side

Keys K6-K9 on the right to learn commands under the main keys on

the remote.

If you press a right Side Key (to select Main Keys) you are going to learn, say, the Prog Up

key from an existing remote and store it under the Prog Up key on the H510 remote.

Or learn the Power key from an existing remote and store it under the Power key on the

H510 remote, etc.

If you press a left Side Key (to select Side Keys) you are going to learn, say, the “DVD

Zoom” function from an existing remote and store it under a Side Key on the H510 remote.

You will then be able to name the key “DVD Zoom” and access this “DVD Zoom” function

from the Mode screen when the remote is in the mode that you selected when you learned

this “DVD Zoom” command.

Learning Main Keys

At the Home screen press the Side Key next to Setup and then on the

Side key next to Learn.

Then press one of the top 4 Side Keys K6-K9 to the right of the

screen.

Select the Device you want to learn keys for. In this example we

only have a TV, Cable Box and Satellite Receiver set up, so the rest

are grayed out, but you can still select any of the devices to learn

commands for. You are then instructed to line up the remotes, and

press the key on the H510 remote that you want to learn.

You then point the remote you want to learn commands from at the

bottom of the H510 remote, and press the key on the H510 remote

that you want to learn a command under, e.g., the Power key.

You then press and hold (in this example) the Power key on the

other remote, until the display shows that the command has been

successfully learned. Note for some types of key you might need to

hold the key pressed, but for other types a quick press is sufficient.

Experiment a bit. If keys you learn are sent multiple times try learning

them with just a quick press. (See Tips on Learning on page 21).

If the screen says Failure, you can press the key and try again.

You can continue learning more individual keys by following the

instructions on the screen, and then press Done when you’re finished.

Learning Side Keys

At the Home screen press the Side Key next t to Setup and then on the

Side key next to Learn.

Then press any of the Side Keys K1-K5 to the left of the screen.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emtec H510 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emtec H510 Manual

Product: