Manual Emtec H510 (page 10 of 74) (English, German, Dutch, French, Italian)

473755

Zoom out

Zoom in

1/74

1918

Advanced Settings

Press the HOME key, then select Setup, then select Advanced.

The screen to the right lets you change the backlight delay; enter codes

for devices directly from the printed code list that came with the remote;

set up punchthrough for various devices; limit the channels that young

children can access and clear (erase) various things you’ve set up in the

remote. .

Display Options

Select Options, then press a Side Key to the left or the right of the option

to adjust the setting. Then press OK. Backlight adjusts how long it takes

before the screen goes black (approx 2-35 seconds) if you don’t press

any keys.

Key Transmit Time changes the delay between digits when sending

favourites, e.g. 1–6–2. This can be used in situations where the channels

are not accepted by the set-top box.

Press the side key next to Default to reconfigure these 2 functions to

their original setting.

Device Codes

Select Device Codes. Then Select a device. Devices that have not yet

been set up are grayed out. You can select them here and set them up

by entering the device code from the printed code list. Or you can

change the code for a device that had already been set up by simply

entering the new code.

This screen also lets you view the codes for any device that’s been set

up. In the above example you can see the codes that are set for TV,

Cable, and SAT. We’ve selected CD and can then enter its 4 digit code

from the code list, using the number keys on the remote. The above

also shows that we’ve learned codes under the AUX1 key in DVD

mode.

Press the side key next to Language to choose a different language,

then at the screen to the right select the language you want.

(1)

You can also change the device type by pressing the key on screen (1) next to the device that

you are editing the code for. Pressing this key repeatedly cycles through all available device

types.

Programming Combo Device Codes

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) will require you to set up

two different Mode keys to control both parts of the Combo device. For example, if you have

a TV/DVD Combo, you might need to set up one code under the TV key to control the TV

part AND a separate code (under any other Mode key) to control the DVD part. Other Combo

devices have one code that will control both parts of the device. See separate code list.

To set up a combo device, press the HOME key, then select Setup, then select Advanced then

Device Codes, as described on previous page.

Punchthrough

This lets you set up how various keys on the remote operate in various modes. For example

you might want the Volume Up/Down and Mute keys to ALWAYS operate your TV, no matter

what mode the remote is in. Or you might want the Play, Stop, Pause REW, FF, and Record

keys to ALWAYS operate your VCR no matter what mode the remote is in.

Press the HOME key, then select Setup, then select Advanced, then Punchthrough.

Then select the device you want to set up Punchthrough for. E.G., TV.

At this screen you set how you want the Volume Up/Down and Mute

keys to operate when the remote is in TV mode.

Then you select how you want the Channel Up/Down keys to operate

when the remote is in TV mode.

Then you select how you want the Play, Stop, Pause REW, FF, and

Record keys to operate when the remote is in TV mode.

For example, here we’ve set the Volume and Mute keys to operate

the TV in TV mode (i.e. Punchthrough Not Set); Prog Up/Down to

operate the Cable Box; and Play, Stop, Pause, etc., to operate the

DVD Player - even though the remote is in TV mode.

Here we’ve set the Volume and Mute to operate the TV; and Prog

Up/Down to operate the Cable Box; - even though the remote is in

DVD mode. Play, Stop, Pause, etc., will operate the DVD (i.e.

Punchthrough Not Set for Play, etc.)

You need to set up Punchthrough for each device you’ve set up in the

remote. I.E., you need to set up how you want the “Volume Up/Down

and Mute” “Prog Up/Down” and “Play, Stop, Pause REW, FF, and

Record” keys to operate for each device that you have set up, i.e., for

whatever mode the remote is set to.

Note also that if you want some other keys to operate in a different mode from what they

normally operate in, you can “learn” the key(s). E.G. if you want your AV key to still switch

the TV’s input when you’re in cable mode, you can learn your TV’s AV key under cable

mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Emtec H510 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Emtec H510 Manual

Product: