612378
8
Zoom out
Zoom in
Previous page
1/10
Next page
8
|
ENGLISH
4. Click the ‘UPS’ tab.
5. Click ‘Select’ near Details.
6. Choose ‘Generic‘ near ‘Select manufacturer’.
7. Select ‘Custom’ in the field below.
8. Select the COM port to which the UPS is connected in the ‘On port’ field.
9. Click ‘Next’.
10. Here you will need to set the polarity of the UPS-signals. Set ‘Power Fail/On
Battery’ and ‘Low Battery to ‘Negative’. Set ‘UPS Shutdown’ to ‘Positive’.
11. Click ‘Finish’.
12. Click ‘Apply’.
By clicking the ‘UPS’ tab you can now view whether the computer is running on mains
current or if it is receiving power from the UPS. You can also view the current status of
the UPS itself.
4.2 Settings
By clicking ‘Configure’ near ‘Details’ you can further configure the UPS. Check ‘Enable
all notifications’. The fields below will turn from gray to black. You can now set how
many seconds there will be between the detection of a power failure and the first
alarm signal and after how many seconds this signal should repeat itself.
Critical alarm
Under ´Critical Warning´ you can indicate if an there should be an alarm signal when
the battery of the UPS is almost drained. Check ‘Minutes on battery before critical
alarm’. There you can set the number of minutes the computer will be receiving power
from the UPS before an alarm signal should ring out. Consider the capacity of the
UPS when settings the number of minutes.
If you choose to automatically shutdown the computer after the critical alarm signal,
you can set a program to run before shutdown (for instance to make a backup of
certain data). If you wish to use this function, check ‘When the alarm occurs, run this
program’. Click ‘Configure’ to select the program and further configure this option.
Note! By clicking ‘Configure’ you will find many settings concerning the program you
want to run, how many times the program needs to be executed and under which
conditions the program should be executed.
Check the option ‘Finally, turn off the UPS’ if you want the UPS to shutdown after the
critical alarm signal.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Eminent EM3980 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Eminent EM3980 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Eminent EM3980

Eminent EM3980 User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info