6
|
ENGLISH
About UPSmart 2000R
Here you can find certain information about UPSmart 2000R, such as the version and
the serial number.
3.0 UPSmart 2000I software
The EM3984/EM3988 is supplied with UPSmart 2000I software. This software
package enables you to view the status of the UPS and change multiple settings.
During a long lasting power failure the software will correctly shut down your computer
before the battery of the UPS is drained.
3.1 Installing the software
1. Insert the CD-ROM into the CD-ROM drive or DVD drive of your computer.
2. The Setup menu of the software will automatically appear.
3. Click ‘Next’.
4. You will now be asked to enter a username, company name and serial number.
Enter this information. The serial number can be found on the sleeve of the CD-
ROM.
5. Select the installation path and click ‘Next’.
6. Enter an installation folder name and click ‘Next’.
7. Click ‘Next’.
8. Click ‘Install’.
9. Click ‘Finish’ to finish the installation of the software.
10. Start the UPSmart 2000I software.
11. A new screen with nine options will appear.
12. Click the option ‘Setting’.
13. Select the correct USB or COM port number at ‘Communication port setting’.
Usually this is ‘USB’ or ‘COM1’.
14. Click ‘OK’.
The message ‘Connected’ will appear in the log field. If this message does not appear,
it is possible you selected an incorrect port or the cable has incorrectly been
connected. If the serial cable is correctly connected you will need to choose another
COM port, as explained in steps 12, 13 and 14.
3.2 UPSmart 2000I options and settings
Schedule
When you click ‘Schedule’ a new screen will appear. Here you can schedule a task for
the UPS for example a self-test or a system shut-down.
Settings
When you click ‘Settings’, a new screen will appear. Here you can set the COM port or
USB port of the computer to which the UPS is connected. You can also set the
