7.2 UPSilon 2000 options and settings
When starting UPSilon 2000 four tabs will appear. These tabs allow you to change the
status view. You can choose, amongst others, between voltage meters (Meter) or
graphs (Chart). In the status screen itself you can view items such as Input/Output
voltage, temperature, battery status and power consumption.
In the left part of the screen you will see a number of menu options. We will
summarize these options below:
7.2.1 Settings
The menu option ‘Settings’ allows you the change a large number of settings.
General
By clicking ‘General’ you can set the communication protocol, the COM or USB port
and a password if the UPS is managed from another computer. You can also choose
whether the status information generated by the UPS has to be saved and how often
this needs to be done.
Shutdown
The option ‘Shutdown’ enables you to establish the steps UPSilon 2000 needs to
take as soon a problem with the power supply occurs. Enable ‘Turn Off UPS’ to
specify the number of minutes after which UPSilon 2000 will shutdown the computer
and the UPS after problems with the power supply have been detected.
Warning Message
The option ‘Warning Message’ enables you to display a message on the screen
when a specific event occurs. Here you can also disable the pop-up messages if
preferred.
Email
The option ‘Email’ Enables you to setup E-mail messages that will be send from
UPSilon 2000 to a specified email. You can also specify which events you wish to
receive an e-mail for.
SMS
The option ‘SMS’ is not supported by Eminent
ACPI
The option ‘ACPI’ (Advanced Configuration and Power Interface) provide the
possibility to change the UPS Name/Manufacturer/Date of installation. And also
provide a self-test function.
