536726
20
Zoom out
Zoom in
Previous page
1/62
Next page
18
Press to exit Walk Test and return to the top
level Test Mode menu.
RF ENVIRONMENT TEST
Scroll through the top level Test Mode menu until RF
Environment is displayed.
If the ambient environment is full of radio frequency, an
indication of
ENVIRON . . POORwill be shown
on the LCD screen.
DIGITAL DIALER TEST
Scroll through the top level Test Mode menu until
‘DIGITAL DIAL TEST’ is displayed and press .
In order to test the digital dialer properly, the
prerequisite is to set the telephone number, unit ID
number and to turn on ‘4-2-1 Monitor Center’ in the
programming mode. If the telephone number is o.k,
‘TEST….PASS’ will be shown. If ‘TEST….FAIL is
shown with ‘LINE STATUS’ LED flashing, please check
the telephone line is well connected and retry the test
again.
When testing is in progress, simply press to
stop testing.
VOICE DIALER TEST
Scroll through the top level Test Mode menu until
‘VOICE DIAL TEST’ is displayed and press .
In order to test the voice dialer properly, the
prerequisite is to set the telephone number, record the
message for main and intruder, and to turn on voice
dial in the programming mode. If ‘LINE STATUS’ LED
is flashing, please check the telephone line is well
connected and retry the test again.
When testing is in progress, simply press to
stop testing.
WIREFREE SIREN SERVICE ON/OFF
Scroll through the top level Test Mode menu until
‘Wirefree Siren Service ON/OFF’ is displayed and
press .
This offers the flexibility of removing or changing siren’s
battery. Wait for 10 seconds until ON/OFF duration
has elapsed, then go ahead with fixing the siren as
desired.
ALARM TEST
Scroll through the top level Test Mode menu until
‘ALARM TEST’ is displayed and press .
Scroll though the menu until the required alarm
displayed and press to operate the selected
alarm for 5s.
Select ‘Wirefree Siren Test’ to operate the External
Solar Siren.
Select ‘Hardwire Siren Test’ to operate the Smart
Home Box Siren and external hardwired Siren (if
connected).
Select ‘Relay Test’ to operate the External hardwired
(N.O./N.C.) relay contacts.
Press to exit Alarm Test and return to the top
level Test Mode menu.
DEFAULT SETTINGS
User Setup
Admin: 1234
Password
User 1~7:
Not Programmed
Name Admin. User 1~7
Tel/SMS Remote Admin: ON
User 1~7: OFF
Latchkey Report OFF
Record User Message Not Programmed
Replay User Message Not Programmed
Remoter Not Programmed
Home Box Setup
Alarm Time 180s
Internal Siren ON
Wire Siren ON External
Siren
Wireless Siren ON
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro HIS20SF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro HIS20SF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info