536726
22
Zoom out
Zoom in
Previous page
1/62
Next page
20
Backup & Restore
Backup Today’s DD/MM/YY
Restore Not Programmed
RESET
After carrying out the following steps, the Smart Home
Box will not return to factory default, instead, the
memory of any settings and learnt devices (e.g. PIR
detector, magnetic contact detector and remote control)
will all be washed out. To reset the Smart Home Box:
1. Press
, ,
User Password
to place the system in Test Mode.
2. Undo the Smart Home Box cover fixing screws and
open the cover.
3. Switch OFF the mains supply to the plug-in PSU
Adaptor and remove the plug from the DC power
socket in the Smart Home Box.
4. Remove either back-up battery and disconnect the
battery leads.
5. Set jumper link P1 to the ON position.
6. Reconnect the battery leads and replace the
back-up battery in position.
Reconnect the PSU Adaptor plug to the DC power
socket in the Smart Home Box and switch On the
supply to the PSU Adaptor.
7. As the Smart Home Box powers-up, ‘EEPROM
Reset’ will be displayed indicating reset is taking
progress. Once the memory reset has been
completed, ‘DISARM READY’ will be displayed.
The Smart Home Box will now be reconfigured with
new settings.
8. Reset jumper link P1 to the OFF position.
9. Close the Smart Home Box cover and refit the
fixing screws.
Note: please always remember the next step you
should carry out after resetting the Smart Home Box is
ID code learning for each device.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elro HIS20SF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elro HIS20SF in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info