Manual Elro-Flamingo HA31S (page 10 of 24) (English, German, Dutch, French)

458070

Zoom out

Zoom in

1/24

-2--3-

ARM & DISARM

Arm the unit by simply entering your security code then press the “key sign”

button and a single beep will be heard. The green LED will light for

approximately 30 seconds to indicate the unit is armed. While there is

movement in front of the PIR Movement Activated Sensor and the Control Panel

will light, indicating the PIR Movement Activated Sensors are detecting

movement. 60 seconds after you have left the house, the green LED will

extinguish and the unit will become fully armed.

As each secured door is opened, the red LEDs on the PIR Movement Activated

Sensors will flash and the Control Panel will beep once to indicate that you have

8 seconds in which to disarm the unit. To disarm, simply re-enter your security

code and press the “key sign” button. The unit will emit a double beep to

indicate that it is now disarmed.

If the unit is not disarmed within the 8 seconds, the piezo siren will emit a loud

sound to alert the occupants of the house to an intruder. To disarm the unit

under these circumstances, simply re-enter your security code and then press

the “key sign” button.

SPECIFICATIONS

Entrance delay time: 8 seconds

Exit delay time: 30 seconds after no movement at Sensors

Low battery indicator: Red LED Flashes approx. once per second

and single beep every 20 seconds.

Alarm sound reset time: 1 minute

Intruder Indication: Green LED will light after resetting of alarm

to indicate a burglar was detected

Alarm Output: Approx. 110dB at 1-metre

Wireless range of transmitters: 25-metres approx.

Movement Activated Sensor Range: 7-metres approx. and 120 scan angle

BEZDRÁTOVÝ SENZOR OKEN/DVERÍ

RÍDÍCÍ PANEL

Otevrete zadní cást Bezdrátového Senzoru Oken/Dverí a vložte 1 x 9 voltovou

alkalickou baterii, prišroubujte jazýckový spínac ke zdi pomocí dodaných šroubu

a pak zavrete vícko prihrádky baterie.

Je duležité správne umístit Senzor Oken/Dverí. Ujistete se, že je jazýckový

spínac a magnet umísten soubežne a šipky mírí presne jedna ke druhé.

Vzdálenost mezi cástmi nesmí presáhnout 12mm (1/2 palce). Pri otevrení okna

ci dverí, LED dioda na chvilku zabliká.

Pripravte si instalaci Rídícího panelu tím, že našroubujete dva šrouby do zdi ve

vzdálenosti 137mm na šírku a v pohodlne dosažitelné výšce nad zemí, ve

vzdálenosti do 1 metru od zástrcky.

Volba Domovního Kódu

Pomocí nastavení prepínacu Domovního Kódu do pozice „OFF“ (Vypnuto) nebo

„ON“ (Zapnuto) mužete zvolit jeden ze 16 ruzných kódu. Každý Senzor má

stejnou sadu prepínacu, která je umístena v prihrádce baterie. Ujistete se, že

všechny jednotky mají nastaveny stejný Domovní Kód.

Otevrete prihrádku kabeláže u HA31S odšroubováním šroubu na spodní strane

Rídícího Panelu a odejmete víko.

Zastrcte konektor AC Adaptéru do zdírky uvnitr prihrádky. Vratte kryt kabeláže

namísto a prišroubujte.

Otevrete prihrádku baterií Rídícího Panelu odšroubováním šroubu na spodní

strane. Vložte 3 nové alkalické baterie velikosti „AA“ vratte kryt zpet a

prišroubujte ( piezo siréna vydá dvojité pípnutí ).

Prišroubujte rídící panel na upevnovací šrouby, které jste si pripravili dríve.

Zapnete AC adaptér. Váš Systém Alarmu je nyní pripraven na programování.

PROGRAMOVÁNÍ

Nejdríve musíte zadat bezpecnostní kód pomocí klávesnice Rídícího Panelu.

Bezpecnostní kód si sami zvolíte a bude sloužit k nastavení a odstavení jednotky.

Zadejte váš bezpecnostní kód následujícím postupem:

1. Zadejte továrne prednastavený bezpecnostní kód “1, 1” a stisknete “*”.

(Uslyšíte jedno pípnutí).

2. Zadejte váš vlastní bezpecnostní kód (až ctyri císlice) a stisknete znovu “*”.

(Uslyšíte melodii).

Pro zmenu vašeho bezpecnostního kódu, opakujte predchozí instrukce, ale

namísto továrne prednastaveného kódu použijte váš starý bezpecnostní kód.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elro-Flamingo HA31S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elro-Flamingo HA31S Manual

Product: