Manual Elma 6700 (page 47 of 56) (English, Danish, Swedish, Norwegian)

668441

Zoom out

Zoom in

1/56

Elma 6700 side 47

4. For current measurements up to 20A AC, set the function switch to the yellow 10A

position and insert the red test lead banana plug into the 10A jack.

Press the soft key labeled Menu. Move the menu selector to the menu item labeled

AC. Press the soft key AC.

5. Read the current in the display.

Understanding Function Menus

Each primary measurement function (rotary switch position) has a

number of optional sub-functions or modes accessed by pressing

the softkey labeled Menu (F1). A typical menu is shown in Figure.

Menu selection is indicated by the filled-in black square(hereafter

the menu selector) to the left of a menu item. Use the four front-

panel cursor buttons to position the menu selector next to a menu item. As the

menu selector moves between menu items, the four softkeys and their labels change to

reflect the available functions and/or modes available for the selection menu item.

Using Help

While operating the Meter, more information about a selected function, a front-panel

button, or a menu item may be necessary. Press soft key HELP to open an information

window that lists topics covering the functions and modifiers that are available at the time

the button is pressed. Each topic provides a brief explanation on a Meter function or

feature.

The number of information topics displayed at any one time may exceed the display area.

Use the softkeys labeled Next and Prev to move from topic to topic. Use the softkey

labeled More or and to scroll through the information a full screen at a time.

Measuring AC and DC Signals

The Meter is capable of displaying both AC and DC signal components (voltage or current)

as two separate readings or one AC+DC(RMS) value combined. As shown in Figure , the

Meter displays ac and dc combinations two ways:

DC displayed over AC (DC,AC), and AC combined with dc (AC+DC). Select one of these

three displays using the Function and Mode menu. With the rotary switch set to V, mV, A,

mA,or uA, press the soft key labeled Menu. Move the menu selector to the menu item

labeled AC+DC. At this point, three different soft key labels indicate AC+DC (F1),and

DC,AC (F2). Press the soft key that presents these two signals as needed. While in any of

the three AC+DC modes, peak measurements, frequency, duty cycle, relative %, and

period measurements are not allowed. In addition to these modes, MIN MAX, relative.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elma 6700 in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 13,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elma 6700 Manual

Product: