Manual Elma 6700 (page 48 of 56) (English, Danish, Swedish, Norwegian)

668441

Zoom out

Zoom in

1/56

Elma 6700 side 48

Capturing Minimum and Maximum Values

The MAX MIN Record mode captures minimum, average, and maximum input values.

When the input goes below the recorded minimum value or above the recorded maximum

value, the Meter beeps and records the new value. The Meter stores the elapsed time

since the recording session was started at the same time. The MAX MIN mode also

calculates an average of all readings taken since the MAX MIN mode was activated. This

mode is for capturing intermittent readings,recording minimum and maximum readings

unattended, or recording readings while equipment operation precludes watching the

Meter. The MIN MAX mode is best for recording power supply surges, inrush currents,

and finding intermittent failures. Response time is the length of time an input must stayat a

new value to be captured as a possible new minimumor maximum value.

To activate the MAX MIN mode, press MAX MIN. As shown in Figure, the Meter displays e

at the top of the measurement page, and the MAX MIN start date and time along the

bottom of the page. In addition, the recorded maximum, average, and minimum values

appear in the secondary display with their respective elapsed times.

To stop a MIN MAX recording session, press the softkey labeled

Stop. The summary

information in the display freezes, and the softkeys change function

to allow saving the collected data. Pressing the softkey labeled

Close exits the MIN MAX record

session without saving the collected data.

To save the MIN MAX screen data, the MIN MAX session must be ended by pressing the

softkey labeled Stop. Next, press the softkey labeled Save.A dialog box openswhere the

default saved name can be selected or anothername assigned. the softkey labeled Save

to store. Pressing the softkey labeled. Restart while MIN MAX is running stops the MIN

MAX session, discards all MIN MAXdata, and immediately starts a new MIN MAX

recording session.

Capturing Peak Values

To activate the peak mode, press the softkey labeled Menu.Move

the menu selector next to the menu item labeledPeak, CF or

Peak.

Press the softkey labeled Peak to start the peak recording

session.

Relative Values

To activate the peak mode, press the softkey labeled Menu. Move the menu selector next

to the menu item labeled REL or Peak. Press the softkey labeled REL to start the peak

recording session.

If the Meter is already in the relative function, pressing Rel% causes the Meter to turn off

relative and display relative percent.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elma 6700 in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 13,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elma 6700 Manual

Product: