668441

Elma 6700 Manual

44
Zoom out
Zoom in
Previous page
1/56
Next page
Elma 6700 side 44
Making dB Measurements
The Meter is capable of displaying voltage as a dB value, either relative to 1 milliwatt
(dBm), a reference voltage of 1 volt (dBV) or a user-selectable reference value.
1. Set the function switch to the green VAC position.
2. Press the softkey labeled Menu. Move the menu selector to
the menu item labeled dBm. Press the softkey dBm
3. Insert the black test lead banana plug into the negative COM
jack. Insert red test lead banana plug into the positive V jack.
4. Read the voltage in the main display and the dBm in the
Secondary display
5. To select another reference value, press the softkey labeled Ref to display a
message box with the current reference value. Pressing or , scrolls through the
nine predefined references: 4,8,16,25,32,50,75,600 and 1000. Set the reference by
pressing the softkey labeled OK.
Low Pass Filter
The Meter is equipped with an ac low pass filter. When measuring ac voltage, press the
soft key labeled Menu to open the function menu, and move the menu selector to the LO
item. Next, press the softkey labeled LO to toggle the low pass filter mode .
Voltage Measurements
CAUTION: Do not measure mV voltages if a motor on the circuit is
being switched ON or OFF. Large voltage surges may occur that can
damage the meter.
1. Set the function switch to the green mV position.
2. Press the soft key labeled Menu. Move the menu selector to
the menu item labeled mVDC(mVAC). Press the soft key
mVDC(mVAC).
3. Insert the black test lead banana plug into the negative COM
jack. Insert the red test lead banana plug into the positive V
jack.
4. Read the mV voltage in the display
Temperature Measurements
1. Set the function switch to the green TEMP( C or F) position.
2. Insert the Temperature Probe into the input jacks, making sure
to observe the correct polarity.
3. Read the temperature in the display
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Elma 6700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Elma 6700 in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 13,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info