Manual Elma 6700 (page 42 of 56) (English, Danish, Swedish, Norwegian)

668441

Zoom out

Zoom in

1/56

Elma 6700 side 42

9-Mode annunciators Indicates the Meter’s mode.

10-Minimeasurement Displays the lightning bolt (when necessary) and the input value

when the primary and secondary displays are covered by a menu or pop-up message.

11-Date Indicates the date set in the internal clock.

12-Beeper Indicates the Meter’s beeper is enabled (not associated with the continuity

beeper).

13-Units Indicates the units of measure.

14-Secondary display Displays secondary measurement information about the input

signal.

Bar Graph

The analog bar graph functions like the needle on an analog meter, but without the

overshoot. For frequency, duty cycle, pulse width, dBm, and crest factor functions, the bar

graph represents the amplitude of the input signal (volts or amps) and not the value in the

primary display. The bar graph is not shown for capacitance, temperature, AC+DC, AC

over DC, peak, or min max functions. For DC voltage, DC current, and all relative percent

modes, a zero-centered bar graph is displayed. For DC voltage and current, the bar graph

range is the maximum of the selected range. For relative percent mode, the bar graph

goes to ±10 %. The number of lit segments indicates the measured value and is relative to

the full-scale value of the selected range. In the 50 VAC range, for example, the major

divisions on the scale represent 0, 5, 10, 15, 20, 25, 30, 35, 40, 45, and 50 VAC. An input

of 25 VAC turns on segments up to the middle of the scale.

Page Area

The page area of the display is where the main meter content is displayed. The primary

display (upper half of the page area) is where the most important value of the selected

function is shown. The secondary display contains the bar graph and values that may be

measured in addition to the primary function value. For example, with frequency

measurement selected in Vac, the frequency value will appear in the primary display with

the ac voltage value in the secondary display.

Softkey Labels

Labels for the four function softkeys (F1 through F4) appear in the bottom row of the

display. These labels will change based on the function and/or menu selection.

Understanding the Rotary Switch

Select a primary measurement function by positioning the rotary

switch to one of the icons around its perimeter. For each function,

the Meter presents a standard display for that function (range,

measurement units, and modifiers). Button choices made in one

function do not carry over into another function.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elma 6700 in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 13,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elma 6700 Manual

Product: