Manual Elma 6400 LCR Meter (page 38 of 48) (English, Danish, Swedish, Norwegian)

668433

Zoom out

Zoom in

1/48

Elma 6400

• Relative mode

Press the button reserve the current DUT readings (DCUR) on primary

display as a reference value (DREF) and the "∆" indicator will be active . The

secondary display will show the percentage of relative value REL%. The REL% =

(DCUR – DREF) / DREF * 100%. Press the button again to show the

reference value DREF on primary display and the "∆" segment will be blinking.

The percentage range is -99.9%~99.9%. When the relative value is larger than

double of reference value (DREF), the "OL%"indication will be shown on the

secondary display. Press and hold down the button for 2 seconds to exit the

relative mode.

• Calibration mode

In order to improve the accuracy of high/low impedance, it is recommended to do

OPEN/SHORT calibration mode before measurement. Press and hold down the

button for 2 seconds to enter calibration mode. The calibration procedure:

OPEN ready1→ →OPEN calibration(30s)→ →SHORT ready2 →

→ SHORT calibration(30s) . During open or short calibration processing, the 30-

second count downwill be shown on LCD panels. If the calibration procedure is

finished, the PASS or FAIL symbol will shown on the primary display. If PASS

symbol for both OPEN and SHORT modes, the calibration data will be saved after

push CAL key again.

OPEN ready means the input sockets or terminals have nothing connected

SHORT ready means put a shorting bar or a short piece of conductive metal (i.e.

paper clip) across the "+" and "-" input sockets or terminals.

Figure 3-Open Calibration (left) and Short Calibration (right)

• Sorting mode

The sorting mode could help the user to make a quick sort for a bunch of

components. Select the primary measurement mode (L/C/R) based on the type of

components to be measured. Insert the component to be used as the "standard"

reference value. Another words, insert a known "good" component that will be

used for testing against all other components. Press button to enter to the

sorting mode.The sorting mode cannot be activated unless the meter senses a

component is connected to either the input sockets or terminals.When sorting

mode is activated,the reference value,range and the tolerance settings can be

modified.

The setting process:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Elma 6400 LCR Meter in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Elma 6400 LCR Meter Manual

Product: